SOURCE: removal of door rt front door panal on a Ford Excersion
make sure to remove any screws or bolts and slide the panel up like when lifting someting and then remove the panel and unlpug any conectors behind the panel if necesary then put it bak the same way
SOURCE: door panal
there's a tool to do it . but if your real carefull you can do it without it. 1st remove all the screws on doors armrest , then side a flat head screw drive in between door and panal slide it around till you feel the plastic buttons then pry slowly, repeat till you get them all.
SOURCE: how to remove rear door panal for 03 cts
If you have power windows start by disconnecting your negative battery cable. Then you need to locate and remove the screws that hold your interior door handles in place (they may be hidden by snap in, or snap on clips). Once you remove the screws that hold the door handles, remove any wire connectors to the handles, if they're not power you will need a small hook (kinda like a knitting needle) to remove the window crank. A manual window crank is held in place by a clip on the base. Slide the hook behind the base and remove the clip. The door panel itself, is held on by snap in clips, and you will need a small pry bar to pull them from the door (try to get as close to, or directly under the clips to prevent them from tearing out of the door panel). Once the clips are removed from the door, pull the panel upward to remove it from the door.
Install in reverse.
I hope this helps you, and I wish you luck on your repair.
SOURCE: do i need some tool or something to get door panal
Regards,
Tony
138 views
Usually answered in minutes!
×