Where is the starter in a 93 mercury capri - 1993 Mercury Capri

remove oil pan and then it is a cinch. but getting the oil pan off with the engine in the car is tricky. remove all the bolts to oil pan and then the bolts to the engine mounts and transmission mount and jack engine up enough to remove oil pan

93 mercury capri half shaft grinding ofter i installed it why ...

www.fixya.com/cars/t24282896-93_mercury_capri_half_shaft_grinding
Apr 29, 2014 - Why is it grinding when I drive it and wont go in reverse ... The firing order is 1-3-4-2. All things Capri are found at: http://www.techcapri.com/

Why not just replace the clutch slave cylinder? A 12.00 part.

Could you please explain in further detail what is the L wire you're referring to?

Here you go. Enjoy!

https://www.techcapri.com/1991_Service_Manual.html

The cooling fan bolts to it and the upper radiator hose will lead you near it.Also the hoses going to the heater core come out of it.

This is a very good online manual for the Capri.


http://www.techcapri.com/Repair/Capri_Service_Manual.htm

check out fuel pump.and filter.

hi,you have to fine-out if your old oil sensor is ntc or ptc,ask your dealer,then you can look for the sensor,ty

its the alternator pulley thats defective and in order to pull the alternator you a have to take off the piece with the hoses on it above the alternator and you can wiggle it out