2003 Oldsmobile Silhouette Logo

Related Topics:

Posted on Nov 21, 2011

2003 oldsmobile silhouette door ajar light stays lit

5 Related Answers

Dan Dubay

  • 65 Answers
  • Posted on Jul 15, 2008

SOURCE: 95 ford windstar door ajar

These switches are inside the doors attached to the door latch assembles.If you know some one with a scan tool you can go into the body computer and see which one is showing open when all the doors are closed. The most likly one is the drivers side door or the two in the rear gate. I've replaced those the most.If you don't want to replace them you can unplug them and the lights will go off. Hope this helps. If you need more info let me know> Thanks Dan

Ad

junk camera

  • 4 Answers
  • Posted on Feb 24, 2009

SOURCE: 2003 ford expedition "door ajar" & interior lights staying on

I had the same problem with my 2003 F-150. To fix the problem I spayed WD-40 into each door latch, problem resolved!!!

Anonymous

  • 1 Answer
  • Posted on Jul 30, 2008

SOURCE: door ajar light stays on

I have the same problem with my passenger door all the time. The dealer was nice and didn't charge me for some advice. Find out which door it is or do this to all. It is the part on the door the grabs the round thing in the door jam. It looks like two fingers kinda. Spray with WD-40 and clean with a rag to get all the dirt out of there. Spray again and open and close the door several times. This clears my problem and I hope this helps you too.

Anonymous

  • 1 Answer
  • Posted on Jan 01, 2009

SOURCE: Ford taurus door ajar light stays on

I had the same problem. WD40 cured this in a flash! Be generous with the WD40 to allow parts to loosen and clean the "gue" that has built-up over the years. Several open and closings of the door should do the trick. Note that cold weather exasperates this condition. The best to you all in the new year!

Anonymous

  • 1 Answer
  • Posted on Feb 18, 2009

SOURCE: 2003 Explorer door ajar light stay on when all doors are closed

I had this problem on my 2003 explorer and took WD40 and gave the lock mechanism a good dose where it meets the clasp on the door jam. Then open and close the doors a couple of times to get them working. They get gummed up and sometimes have a tendency to stick.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2003 toyota tundra door ajar light stays on

Usually a problem with the sensor in one of the door latches.
0helpful
1answer

Interior Lights, Radio, and Gear Indicator Light on Cluster will not turn off when power is connected

The door actuator ,door ajar switch has nothing to do with the Gear Indicator Light on Cluster . Did you have the BCM programmed ? Can't just replace this without programming . Having the BCM check for DTC'S - diagnostic trouble codes should have been the first step in the diagnostic's for this problem an testing power an grounds . Is the door ajar light lit on the insturment cluster ? If not ,it's not a door actuator or door ajar switch .

Important: Perform new BCM setup when you replace Body Control Module (BCM). Refer to Body Control Module (BCM) Programming/RPO Configuration .
Fuse Block
Right side of the IP, in the right front door opening
RAP relay ,contacts stuck closed . Right I/P fuse box ! Open the passenger door ,at the end of insturment panel pull plastic cover !
0helpful
1answer

What fuse is for the door ajar on a ford f-350 super duty

http://www.f150online.com/forums/electrical-systems/193352-if-your-door-ajar-dome-light-staying-read-2.html

worked on my f-250
0helpful
1answer

Doorajar liht and beeper sounds

It can be issue with faulty sensor or a wiring issue.Troubleshooting is required.
Click the help link shown below:---
Door Ajar Light and Dome Light Remains ON? http://whoisbyme.blogspot.in/2012/06/2003-mercury-sable-door-ajar-light-and.html
------------
Door ajar light stays on? http://technoanswers.blogspot.com/2012/01/door-ajar-light-stays-on.html

--------
Thanks.
0helpful
1answer

Why do the parking lights stay on after locking

Some car doors had a switch in the body door frame.When you close it the switch which had a relay spring that sometimes become damage or need lubrication or the system that manage the automatic on/off is damage.
0helpful
1answer

Door ajar light stays lit when all doors are shut 2005 GMC Canyon

Hi,
This seems that either of the door switches is/are faulty. Try pushing the switches fully on each plunger switch on each door individually, keeping the other doors closed while you do. See if one of them causes the light to go out. If you do find one turns the light off, it's an adjustment problem with the plunger switch. May still need to be replaced if it won't depress enough with the door closing to turn off.Let us know if you were looking for something more else please accept the suggestion.
Thank You for contacting Fixya.com
1helpful
3answers

The door ajar light on the instrument cluster is lit, and the interior lights stay on when the car is off. The locks will lock with keyless but the lights stay on cause of the door ajar. I have pulled...

one of the switches is stuck in the door latch try spraying the door latches with lots of good penatrating oil (not wd 40 ) slam the doors sevral times till the light gos out dont forget the rear door now you can take it to the dealer and they can tell you witch door it is causing this problem but they want $$$$$ now also the switch is replaceable but iy is a lot of work dont woory about the lights killing the battery as they will turn off in 5 to 10 min
0helpful
1answer

The interior lights in Oldsmobile Silhouette

The problem is likely a faulty (sticking) relay - remove/replace the relay and check the lights extinguish.
31helpful
3answers

2003 Explorer door ajar light stay on when all doors are closed

I had this problem on my 2003 explorer and took WD40 and gave the lock mechanism a good dose where it meets the clasp on the door jam. Then open and close the doors a couple of times to get them working. They get gummed up and sometimes have a tendency to stick.
1helpful
1answer

Door Ajar Warning Light Stays On

Our Ford Expedition & an Olds Silhouette Premier & both did the same thing. Someone online said to spray the inside door where the metal connects with the frame & sensors are there with WD-40. We did & it fixed the problem. Maybe this will work for yours.
Not finding what you are looking for?

123 views

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...