How do I change the language from French to English on my Buick Rendezvous 2003?

The Driver Information Center (DIC) displays PONTIAC or BUICK for 3 seconds and then the most recently used key fob when it first powers up. The DIC returns to the last display status after displaying the key fob number. The DIC can be displayed in English or French. In order to change between English/French press and hold the Mode button for more than 3 seconds .
There are 2 buttons on the DIC.

1. Set button
2. MODE button

Set Button
The Set button allows options to be reset in the DIC. Options can be reset by depressing and holding the Set button for 3 seconds

Press the "setup" button on the radio and scroll through the setting until you get to language settings, select the desired language and your set.

1. Press and hold the personalization button (2) and the trip information button (1) at the same time. The DIC will begin scrolling through the languages. Each language will be shown in that particular language (English will be in English, French will be in French, etc.).
2. When the preferred language appears, release both buttons. The DIC will then display the information in the language that was selected.


Hope this helps....

1. Press and hold the personalization button (2) and the trip information button (1) at the same time. The DIC will begin scrolling through the languages. Each language will be shown in that particular language (English will be in English, French will be in French, etc.).
2. When the preferred language appears, release both buttons. The DIC will then display the information in the language that was selected.




Hope this helps...

Vous avez besoin de regarder dans le manuel du propri?taire.

There are two square buttons on your dash, just to the left of the steering wheel. Press and hold the left until it blinks and it will allow you to set up the languages and such.

You should be able to go through the menu where it goes to LANGUAGE, and click english. I had one here ealrier today. Its all in the owners manual.

When your DIC first displays with the key turned on you need to hold the mode button down for 3 or more seconds

Unless your Rendezvous is Canadian made, you can use the SET button ont he DIC to toggle between English or metric. A Canadian odometer and trip odometer will remain in metric units only. Hope this helps.