Question about 1995 Chrysler Concorde
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
if the grille screws are accessable remove the grille which should give you access to the underside of the lock, you may need a screwdriver to push the lever aside to release the hood
Hope this helps
Posted on May 23, 2009
First verify if latch release is electronically operated or cable operated. If cable, push the latching mechanism back and forth, verify that it springs back into place. Then look at the shaft that the latch hooks to on the hood. Check if one is bent or see if the hood is not properly aligned on the hinges. You might need to raise the latch assembly so it hooks sooner on the hood.
Posted on Dec 09, 2008
SOURCE: inside hood latch broke, so
I would assume that the plastic handle broke from the cable? If so, try grabbing on the end of the cable with a pair of locking pliers. Latch onto the cable and hold the casing, then pull really hard. It should pop the hood. After you get the hood open, replace that cable, or if possible, leave the vice grips on it until you can get it to a shop to get it replaced.
Posted on Aug 05, 2009
take off the left front wheel and fender well. slice off the hood cable insulation get a hook too pull the wire have a buddy pull up on the hood while doing this. Should pop open then hope this helps u out.
Posted on Nov 23, 2009
Tips for a great answer:
Sep 11, 2015 | 2004 Chrysler Concorde
Sep 27, 2011 | 2001 Chrysler Concorde
Jan 27, 2011 | 2002 Chrysler Concorde
Feb 02, 2010 | 2000 Chrysler Concorde
Dec 26, 2009 | 1993 Chrysler Concorde
Dec 03, 2009 | 1998 Chrysler Concorde
Nov 23, 2009 | 1997 Chrysler Concorde
Dec 19, 2008 | 1995 Chrysler Concorde
222 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: