All of the turn signal lights have quit working outside and on the dash. When the turn indicator multifunction switch is engaged a flasher sound is emitted from behind the dash. The emergency hazard lights have also quit working? Is there a flasher? If so, where is it located? Is the Lighting Control Module bad? Is the Multi-Function switch bad?
Is the Lighting Control Module bad? Is the Multi-Function switch bad? Your asking questions that can't be answered without doing electrical circuit testing . You could replace those parts an get lucky an fix it , but suppose you replace them an it doesn't fix the problem ?
Do you know what a wiring diagram is ? what it's for ? Do you have a DVOM - digital volt ohm meter an know how to use it ?
Pinpoint Tests
PINPOINT TEST H: PINPOINT TEST H: THE TURN SIGNAL LAMPS ARE NEVER ON - THE HAZARD FLASHER LAMPS ARE NEVER ON
CONDITIONS
DETAILS/RESULTS/ACTIONS
H1 DIAGNOSTIC TROUBLE CODES (DTCS) FROM LCM
Use the recorded results from the LCM self-test.
Yes If DTC B1873 is retrieved, GO to H2 .
If DTC B1342 is retrieved, CLEAR DTC and PERFORM LCM on-demand self-test. REPLACE the LCM if DTC B1342 is retrieved again. REFER to Section 419-10 . TEST the system for normal operation.
No GO to H2 .
Your best bet , take it to a qualified repair shop .
SOURCE: turn signals and emergency flashers won't work
you need to replace the flasher relay... it's often located in the fuse panel under the dash.... it's generally larger then the other relays.... and it may possibly be blue.
SOURCE: how do I fix the turn signal on my 93 town car
The flasher is located in the fuse box under the dash on the left side of steering wheel and the flasher is in there. If that is what is wrong with them.
SOURCE: 1996 LINCOLN TOWN CAR HAS NO TURN SIGNALS OR
The flasher is located under the sterring wheel to the left, just over the brake pedal, the flasher unit is a (commonly) round or cubic dollar size piece
SOURCE: Turn signals and emergency flashers do not work
the flasher under the dash for your turn signals
SOURCE: lincoln town car turning signal problem.
Are we talking about the key cylinder? if so, do you still have the key? if not makes the job a tad bit harder and involves drilling
Hello
When the Check Engine light is turned on the computer control unit (called the PCM) has sensed a fault in the electronic controls of the engine and/or the emission system. When this happens you will seldom feel the car engine run any different. There are about 200 possible faults that turn the Check Engine light on, to know what has developed a problem you must have the system tested, this is called an OBD2 fault code test, Kragen and Autozone parts stores do this testing for free.
205 views
Usually answered in minutes!
×