2000 Toyota Camry Logo
A
Anonymous Posted on Nov 08, 2011

2000 toyota camry back window brake light is out how to change

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Mayor:

An expert whose answer got voted for 2 times.

Problem Solver:

An expert who has answered 5 questions.

  • Contributor 4 Answers
  • Posted on Nov 15, 2011
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Mayor:

An expert whose answer got voted for 2 times.

Problem Solver:

An expert who has answered 5 questions.

Joined: Nov 15, 2011
Answers
4
Questions
0
Helped
1994
Points
4

Brake window light assembly just clicks off rear dash. IMPORTANT>Replace bulb from Toyota dealer or else brakelight warning light in dash will come on. Something to do with the proper ohms.

5 Related Answers

Anonymous

  • 1861 Answers
  • Posted on Oct 21, 2008

SOURCE: 2004 Toyota Camry Brakes

Raise the vehicle up and remove the rims & tires

Remove the brake pads, and then remove the calipers from the caliper retention brackets, do NOT remove the brake hoses from the calipers.

Remove the caliper retaining brackets from the hub assemblies (2 large bolts on backside of the bracket)

Tap the brake rotors off of the hubs, hit them from the back side of the rotor.

No big mysteries here, this is a very easy job.

Ad

Anonymous

  • 67 Answers
  • Posted on Dec 18, 2008

SOURCE: broken brake light 1997 toyota camry

sounds like a bad bulb. the filament in the bulb will bounce around and reconnect its self sometimes. when it is out tap the lens with your finger tips if it illuminates replace the bulb and recheck. the problem may lay elsewhere, but this is a cheap easy place to start.

Anonymous

  • 11 Answers
  • Posted on Oct 05, 2009

SOURCE: my 2000 toyota camry's back lights are off when I

There could be several problems. It could be your tail fuse, taillight control relay, light control switch, integration relay, or wire harness. I would start with replacing the fuse. If that doesn't work then try the relay, it looks like the relay next to it, the Defogger Relay is the same type.

Anonymous

  • 1986 Answers
  • Posted on Oct 07, 2009

SOURCE: How to change a third brake light bulb for 1993 Toyota Camry?

open the trunk and look up along the top of the bumper and you should see two screws / nuts that secure the light assembly.

Anonymous

  • 484 Answers
  • Posted on Oct 26, 2009

SOURCE: 1989 Toyota Camry. No brake lights.

It could be the relay, which is a yellow box located under the carpeting in the trunk on the left side. It is a problem common to your model. Also, check the brake switch's (behind the brake pedal) functionality (12V present with key at ACC or ON and continuity between wires when button engaged).

i hope this helps
-matthew

Testimonial: "Wow! I would have never found the problem without you guys. It was the relay located in the trunk. Thanks!"

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Brake lights not working changed brake light swith bulbs good

did you check the fuse? does the brake light in the back window work?
0helpful
1answer

Change of brake light bulb of toyota camery 2000 which is the center of rear glass area

at that light there should be two screws one on either side take these out and the cover should come off pull the bulb out replace and reverse the process.
1helpful
1answer

My 2000 toyota camry's back lights are off when I drive but work when I hit the brakes. What should I check?

There could be several problems. It could be your tail fuse, taillight control relay, light control switch, integration relay, or wire harness. I would start with replacing the fuse. If that doesn't work then try the relay, it looks like the relay next to it, the Defogger Relay is the same type.
3helpful
1answer

How to reset rear light out indicator lamp

There is no "reset" for the rear lamp failure system. The light goes out automatically wehen all of the rear lamps (brake and tail) are working. Did you check the brake light in the lower part of the back window? Also note that the lamp sensor is very sensitive; it needs to see all the bulbs to be the same wattage. The wattages can vary from nfgr to mfgr. Let me know waht you find on the 3rd brake lamp in the back window.
1helpful
1answer

2000 camry le accelerator sticking

Spray some WD-40 down the accellerator cable, I'm willing to bet it is starting to rust up
Not finding what you are looking for?

1,005 views

Ask a Question

Usually answered in minutes!

Top Toyota Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...