Question about 2004 Jeep Liberty

1 Answer

How To Change Rear Lower Control Arm On A 2004 Jeep Liberty

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 1,975 Answers

Below I have put instructions and diagrams for you. If you have any questions feel free to email me at csautomotivecars@att.net and I will be happy to help if I can. I hope this helps you and good luck.


How To Change Rear Lower Control Arm On A 2004 - 10_31_2011_8_49_16_pm.jpg

10_31_2011How To Change Rear Lower Control Arm On A 2004 - 10_31_2011_8_50_04_pm.jpg_mi

10_31_2011_8_50_04_pm.jpg

Posted on Oct 31, 2011

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you remove the front lower control arm on a 2012 jeep liberty?


It's a fairly big job, usually done in a shop with all the right tools and equipment. Before you try it, take a few minutes to watch this video. If you decide to do it yourself, you can use the video as your guide.


2008 Jeep Compass front lower control arm replacement

Dec 26, 2017 | Jeep Cars & Trucks

1 Answer

Why won't 2004 jeep liberty rear hatch door open?


There is no keyhole and switch on the rear hatch in Jeep liberty.
You can control the hatch by remote key and window/door switch on the driver seat side.
I don't know why they make like this, it's inconvenience.

Jun 09, 2014 | 2006 Jeep Liberty

1 Answer

The brake lights on my taillights will not work.THE LIGHT ABOVE REAR WINDOW WORKS. THIS A 2004 JEEP LIBERTY. WHAT CAN I DO?


Have you checked the fuses, both under the hood and inside the cab? The high light is on a seperaste fuse from the lower vbrake lights.

Aug 29, 2012 | 2004 Jeep Liberty

1 Answer

05 jeep liberty -rear recall done by dealer,,, alignment ,,,jeep drifs to the right


take it back to the dealer and have them check for correct installation of the recall
it is necessary to align the rear of a vehicle before the front is done or you will get "crabbing" which is what you describe
any work on the rear suspension will require that the rear be aligned first

Jun 04, 2017 | 2005 Jeep Liberty

1 Answer

I'm getting a churp in my front shock how hard is it to change them on jeep liberty sport


BEFOR YOU DO THAT MAKE SURE TO HAVE YOUR SWAY BAR AND UPPER IN LOWER CONTROL ARM BUSHINGS CHECKED FIRST BECAUSE A LOT OF TIMES THAT IS USUALLY WEAR THE SQUEAKING AND CHIRPING COMES FROM WHEN YOU TURN A CORNER OR HIT A BUMP

Oct 08, 2011 | 2007 Jeep Liberty Sport

1 Answer

2004 jeep liberty rear passenger side control arm bracket that attatches to frame is rotted out. Is there a place to buy this part other than dealer?


Some enthusiast sites may have something... http://jeepinbyal.com/prod-Rear_Lower_Control_Arms_Mounts-467.aspx
However, if it's rotted out already.. I'd check the dealer if it's covered under the corrosion warranty. That's unusual..

Feb 28, 2011 | 2002 Jeep Liberty

1 Answer

How do you remove the cross arm on a 2004 jeep liberty in order to change the oil pan


sorry to say u cant welded as part of frame need to jack up engine or remove engine to repair

Mar 30, 2010 | 2005 Jeep Liberty

1 Answer

Rear suspension,bushings,2005 jeep liberty


Generally the bushings aren't too expensive (likely about 25-30 each...But, unless you have done this kind of work, driving the bushings out and installing them can be difficult without a press. I've done many in-shop and its nothing like the ones I've done at remote locations using a hammer and chisels etc. You can do this yourself but I'd opt to do the r&r at home and have a machine shop do the actual bushing pressing. If you damage the arm ends you will need to replace the arm or do a bunch of bending to get the bushings back in place.
If you do have a press, than go at it!!

Aug 02, 2009 | 2005 Jeep Liberty

3 Answers

2006 jeep liberty LE under 58,000 came off warranty in march


You must have a piston stuck in one caliper, and it's not releasing the pressure off your brake pad.

May 20, 2009 | 2006 Jeep Liberty

1 Answer

Jeep Liberty Rear Wiper Blade


you should be able to raise it just enough to disengage it from the park ramp according to jeep...if that doesnt work try turning it on then shutting key off in mid stride

Sep 25, 2008 | 2002 Jeep Liberty

Not finding what you are looking for?
2004 Jeep Liberty Logo

1,217 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...