Hi Michael:
P1504 - Idle Air Control (IAC) Circuit Malfunction
This DTC is set when the PCM detects an electrical load failure on the IAC output circuit.
Causes:
IAC circuit open
VPWR to IAC solenoid open
IAC circuit short to PWR
IAC circuit short to GND
Damaged IAC valve
Damaged PCM
The IAC solenoid resistance is from 6 to 13 ohms.
Hope this helps; also keep in mind that your
feedback is important and I`ll appreciate your time and consideration if
you leave some testimonial comment about this answer.
Thank you for using FixYa, have a nice day.
P1537
Intake Manifold Runner Control Stuck Open
P1504
Intake Air Control circuit malfunction
P1506
Idle Air Control Over Speed Error
P0112 Intake Air Temperature Circuit Low Input
P0113 Intake Air Temperature Circuit High Input
P0133 02 Sensor Circuit Slow Response (Bank 1 Sensor 1)
P0420 Catalyst System Efficiency Below Threshold (Bank 1)
P0743 Torque Converter Clutch Circuit Electrical
I hate to hear you are havine so much trouble. These are a basic descrition of each of the codes.
If each of these codes are active, i would imagine you windstar isn
2,657 views
Usually answered in minutes!
Please provide year and engine size please(in cubic inches or liters). Also auto or manual trans, 2 or 4 wheel drive.
2.3 2001 ranger
dtc 1504 how to fix
×