Disconnect the negative battery
cable with a ratchet and socket, read the serpentine belt routing
diagram located under the hood, then release the serpentine belt
tensioner using a ratchet and socket, and carefully remove the
serpentine belt from all of the pulleys with your hands. 2 Install the new belt according
the routing diagram, then ease the belt onto the belt tensioner pulley
and tighten the tensioner with a ratchet and socket.3 Reconnect the battery cable and start the car to test the belt.
Guru needs to take the time to read more carefully.. My girlfriend ownes a 1999 Pontiac Sunfire that I am in the process of fixing again.. A serpentine belt is what operates the alternator power stearing pump, water pump, connects to the crank pulley.. This belt definatly needs removed tho Guru.. Thanks.. Least I didn't have to type on this cell as much :)
×
No.., the serpentine is a belt.. Sunfire has a chain an also an hydro lifters.. Start by putting a jack under engine with a block of wood in between the two.. Take passenger side engine mount out.. Take power stearing off, there is one bolt in back
403 views
Usually answered in minutes!
×