Need diagram of timing marks 95volvo940 - 1995 Volvo 940

THE TIMING MARKS ARE ON THE HARMONIC BALANCER WHEEL.

parts store has a detailed picture of it..

i need a diagram of the timing marks on a 2003 acura 3.5rl

For timing marks and timing alignment diagram of 2.7 intrepid, click the link below and view its details:----

http://schematicsdiagram.blogspot.com/2012/12/dodge-intrepid-2000-v6-27-timing-marks.html

-------------

These wil help.

Thanks.

you dont need a diagram to see the timing marks on the top/bottom pulleys,just clean them off and run a piece of chalk around the perimeter.they are a bit obvious

I have a Toyota Town Ace diesel van, the timing belt broke and I need step by step help how to install new timing belt - timing marks diagram.

Hello tazzie13101,

Below is an image showing the timing marks. I circled the detail for the hole in the cam sprocket, you will look through the hole to aline the mark for the cam.



I hope this helps.

Regards,

Jerry

• Hi, I can help. Please see the diagrams below for your timing marks.

• The picture below is the crankshaft marks that need to be lined up before you remove the timing belt.

• Below is the intake and exhaust camshaft pulley marks.

• Below is an exploded diagram of the engine components in relation to the timing belt.

• Please not that this diagram is good for both 4X4 and 2X4 2.0 Engine (which is the only engine Kia Sportage had that year).

• If you have any comments please feel free to leave them here.
• Hope this helps and thank you for using FixYa.

Regards, Tony

http://images.eurotuner.com/images/eurp_0801_07_z+2001_vw_golf_1-8t+1-8_liter_20v_engine_atp_gt28rs_turbo_vf_engineering_engine_mount_usrt_genesis_415cc_injectors.jpg please rate me!!

woot i feel your pain i had the same problem. go to autozone.com and go to thier vehicle repair.
enter your year make and model and find it. but please hear me on this one.. be carfule thier are like 2 timing references and one timing mark. USE THE DOT. pls i learned the hard way. lol use the dot on the cam sproket. good luck