What is the torque specs for a front wheel hb assembly on a 2006 chevrolet silverado??

Question edited for clarity.
Question moved to model category.

2006 Toyota tundra 4.7L Front End Torque Specs

toyota-specs.com https://toyota-specs.com > cars > 2006 > tundra4.7 > t...
Toyota Tundra Front Axle Nut Torque Spec : 203 ft-lbs · Toyota Tundra Wheel Hub Torque Spec : 100 ft-lbs ...

BHA53102 Axle / Spindle Nut Torque Specification

1A Auto https://docs.1aauto.com > BHA53102 Torque S... PDF Toyota. 4Runner. 1996-02 4 Wheel Drive. Front. 174. 236. Toyota. Sequoia ... Tacoma. 2001-04 4 Wheel Drive. Front. 173. 235. Toyota. Tundra. 2000-06 4 Wheel ...
1 page
https://www.google.com/search?q=2006+Toyota+Tundra+4x4+front+axle+torque

..

• Axle Shaft nut - 177 ft-lb
• Hub and bearing assembly to steering knuckle bolts - 133 ft-lb

2003 chevy silverado 1500 4.3 v6. Changing steering rack and

https://www.justanswer.com > ... > Chevrolet Repair
Jan 11, 2021 - Below are the torque specs you requested: Steering Rack-to-frame mounting bolts: 136 lb. ft. Outer tie rod nut: 37 lb. ft. Outer tie rod ...
1 answer · 1 vote: Coupler clamp bolt to the intermediate shaft: 33 ft. lb.

• 
  

  Torque specs for tie rod end castle nuts - JustAnswer

  https://www.justanswer.com > chevy > 2p3g8-torque-sp...
  Oct 24, 2009 - Tighten the clamp nuts 18 ft. lbs. (25 Nm) (except C3HD). On C3HD models, tighten the clamp nuts to 65 ft. lbs. (88 Nm.

People also ask

Hey Phil, sounds like you do quite a bit of work on your Tahoe.. you need one of these..

http://repair.chiltondiy.com/Pub/DIY/Product.aspx?ca=Repair&b=28779

Chevrolet Silverado Suburban Tahoe Avalanche GMC Yukon Yukon XL Yukon...

Chevrolet Silverado GMC Sierra 1999 thru 2006 2WD and 4WD

Not sure about your model, but in general they are usually around 180 ft./lbs.

Three bolts are 70 lbs,could be 120+/-.

Here are the torque specifications you need:
• Axle Shaft nut - 177 ft-lb
• Hub and bearing assembly to steering knuckle bolts - 133 ft-lb

Those vehicles should have a hub assembly which incorporates a bearing and hub in one unit. To my knowledge the bearing is not serviceable. The hub assembly is bolted to the steering knuckle, so there actually is no wheel bearing torque. The tire/wheel assembly bolts directly to the wheel flange on the new hub assembly.

i have a 2002 HD and the deal told me 177 ft. lbs. good luck

The nut on the axelshaft is 177 ft. LBS.
The 4 bolts on the bearing hub is 133ft. LBS.

Caliper mount bolts are 74 ft/lbs
Driveshaft axle nut is 177 ft/lbs
Hub and bearing mounting bolts are 133 ft/lbs