I need the firing order for a 3.8L 1986 Buick park ave? Coil Pack.

Here's a link to your firing order Jose. Specifications Firing Order AutoZone com

theres no distributor and the firing order for your 3.8 is 1-6-5-4-3-2-the following link shows the coil pack
Buick General Motor 3800 V6 Engine Firing Order DIS IDI ignition timing 3.8 Buick Engine Coil Pack Firing Order Spark Plug Wire Location Which way do the spark plug wires go on & what cylinder is what?
.
For the Buick V6 231 3.8 liter turbocharged engine:
.
Answers!
.
Firing order:
1 - 6 - 5 - 4 - 3 - 2.
.
Spark plug wire location on coil pack:
.
Closest to the back of the car, left to right: 1 - 5 - 3.
Closest to the front of the car, left to right: 4 - 2 - 6.
.
Spark plug wire location on engine:
.
drivers side, front to back of car: 1 - 3 - 5.
passenger side, front to back of car: 2 - 4 - 6.
.----and this link shows the coil pack to cylinders
.
3 8 Buick Turbo Engine Coil Pack Firing Order Spark Plug Wire Location

if you have power to it then it`s a bad coil

Check this site I believe the black images is the coil pack firing order. I used a coil pack from a different model but had to open it up and change the firing order since the spark wires wouldn't reach for my 91 buick. You should have some knowledge about wiring before attempting that. Basically I just switched the wiring on each side inside the coil pack.https://www.google.com/search?q=buick+1991+park+avenue+firing+order&tbm=isch&tbo=u&source=univ&sa=X&ei=reisU9eSH9HioAThh4D4BQ&ved=0CC8QsAQ&biw=1440&bih=748

Check this information about 1986 Buick Park Avenue 3.8 liter V-6 VIN "B"
Identifying Ignition Types I and II...

* On Type I coil packs, three twin tower ignition coils are combined into a single coil pack unit.




* On Type II coil packs, the coils can be replaced separately and the ignition wires are all on the same side of the coil pack.

With Type I Ignition



With Type II Ignition




Hope this helps (remember to rate this free answer with thumbs and leave some testimonial).

the coil pack is the magnavox type. see the link http://www.autozone.com/autozone/parts/1991-Buick-Park-Avenue-Ultra/Ignition-Coil/_/N-jcxqmZ9n80r?filterByKeyWord=ignition+coil&fromString=search

GO TO THE WEB SITE LINK BELOW.
http://autorepair.about.com/library/firing_orders/bl-fo-12257.htm

For the 1991 Buick Park Avenue:
Firing Orders & Cylinder layouts are the same. The difference is in the Ignition Coil Connections. I have included all three (3) types of Coil Systems for the Park Ave, Park Ave Ultra, and Park Ave with a Supercharger.

For ALL the 3.8L V6:
Firing Order:
1-6-5-4-3-2
Cylinders:
.......(back).......
|...1....3....5...|
________________
|...2....4....6...|
.......(front)

For the Type I Coil:
.........(back)
3--->o.|//////|
..........|\\\\\\|.o <---6
5--->o.|//////|
..........|\\\\\\|.o <---2
1--->o.|//////|
..........|\\\\\\|.o <---4
.........(front)

For the Rest of the Coils:
(back)
....6
....3
....2
....5
....4
....1
(front)

For this Type II Coil (Solid One UNIT):
(back)
_____
|....o| <---6
|O....|
|....o| <---3
|....o| <---2
|O....|
|....o| <---5
|....o| <---4
|O....|
|....o| <---1
(front)

For this Type Coil (3-Section UNITS):
(back)
______
|....o.| <---6
|O.....|
|....o.| <---3
_____
|....o.| <---2
|O.....|
|....o.| <---5
_____
|....o.| <---4
|O.....|
|....o.| <---1
(front)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

1988 Buick Electra Park Avenue 3.8 liter V-6 VIN "3"
Identifying Ignition Types I and II

On Type I coil packs, three twin tower ignition coils are combined into a single coil pack unit

.

On Type II coil packs, the coils can be replaced separatelyand the ignition wires are all on the same side of the coil pack.
With Type I Ignition





With Type II Ignition



or...





Good luck.

ecm tells it when to fire