1994 Mazda MX-3 Logo

Related Topics:

Anonymous
Anonymous Posted on Sep 25, 2011
Be the first to answer

Mazda MX3 I am having problems with the Manual Transmission. I had just drove it for about 5 hours straight. Came back out to run to the store and I can't get it into 2nd and 4th gears. Any Ideas what happened???

Answer This Question

5 Related Answers

A

Anonymous

  • Posted on Jun 18, 2008

SOURCE: Transmission slipping first to second gear

Look under 1998 Mazda 626 transmission problems in this FIXYA.

Ad
junkman1249

Ricardo Loranca

  • 552 Answers
  • Posted on Dec 05, 2008

SOURCE: 2001 Jetta Manual Transmission misses 2nd gear

throw out bearing

Anonymous

  • 76 Answers
  • Posted on Dec 13, 2008

SOURCE: 2004 dodge interprid transmission gears

Chances are your engine light is on too. Your actually in 2nd right now, this is called limp mode. It's built into your cars computer to avoid catastrophic failure when a sensor or other issue arrises. You should go imediately to your dealer and have them read the codes and provide you with a proper estimate. My best guess at this time would be a speed sensor.

Anonymous

  • 1 Answer
  • Posted on Dec 15, 2008

SOURCE: Broken Linkage on a Manual Transmission?

what kind of vehicle is it?

Ticodude

Christian

  • 53 Answers
  • Posted on Dec 29, 2008

SOURCE: #5 cylinder misfire

I have a corolla and had #4 cylinder misfire also diagnosed at autozone. After changing the spark plugs, problem persisted, along with the same error code, so they recommended changing the spark plug wires, and that is what fixed it. I would have changed the rotor cap too, but was low on dough. Glad that was not the problem.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

93 Mazda Mx3 with 1.6 engine stalls while city driving after driving high speed interstate driving, what could be causing this issue? Car will start back up after a few hours and run normally.
Does it stall out because the engine is idling slow? Have you scanned the system for codes?
Read full answer
Sep 24, 2016 • 1993 Mazda MX-3
0helpful
1answer

I was wondering how do I add transmission fluid to my 1992 Mazda mx3
Automatic I pressume ! You will have a job filling transmission fluid , as oil filler is on top of transmission , and needs to be filled while on a ramp , somtime special tool need to open filley
Read full answer
Mar 16, 2015 • Mazda Cars & Trucks
0helpful
1answer

93 mazda mx3 was running cut off and won't start
You might check the coil. If there's no spark it has gone bad (around $100.00 at Auto parts stores, if you replace it yourself.) That's the easier one to fix. The other is the distributor. They also go bad, and cause the same problem.
Read full answer
Sep 29, 2013 • Cars & Trucks
0helpful
1answer

Mazda MX3 "Charge" light
You can use VCM IDS for Mazda to have a check
Read full answer
Jul 19, 2013 • 1992 Mazda MX-3
0helpful
1answer

Hello I have a 1993 Mazda mx3 gs 1.8L. For the life of me I can not find a serpatine belt diagram for this car. Please HELP???
your best bet is to purchase service manual from Autozone, Advance, auto parts stores. They handle Haynes & Clymers manuals (they run about $10) or Amazon, Barnes & Noble. I checked online and you're right it's a mystery why the Mazda forums lack that info...
Read full answer
Feb 28, 2011 • 1994 Mazda MX-3
0helpful
2answers

I was told to tap the starter on my 1994 mazda mx3 precidia because my electrical light came on when it would not start. My research has said that the starter is connected to the bell housing on the...
I think someone has misled you. Even if you were able to get it to work by tapping it, you can be sure the problem is going to come back. You need to have that starter tested if you think it is the problem.
Read full answer
Jun 08, 2017 • Mazda MX-3 Cars & Trucks
1helpful
2answers

Mazda mx3 clicking when cold
This is because the oil hasn't circulated in the HLA (hydrolic lash adjusters) that is ontop of the valves/springs under the cam. Once they are full with oil, the clicking stops and they opperate properly! Try running a thicker oil, other than that it's not a big problem unless the ticking is very loud or doesn't stop after it's warm.
Read full answer
Jun 10, 2009 • 1995 Mazda MX-3
0helpful
1answer

How do you fill the transmission fluid on a manual 1993 mazda mx3 v6
the transmission dip is located under the hood and with a funnel you put the transmission fluid in and remember to keep checking while the engine is running warm because it does tend to expand and you want to make sure you're right on the line when you see the red fluid on the stick.
Read full answer
Jun 08, 2009 • 1995 Mazda MX-3
0helpful
2answers

Car won't start. Possibly fuel pump related.
Check the engine codes. That will give you clue where to begin repairs. See if youhave a spark on the plugs also.
Read full answer
May 05, 2009 • 1993 Mazda MX-3
0helpful
1answer

Idiling
here is what you need to do, a cleaning of the intake throttle blade and the idle speed control air-bypass valve, they get full of gunk over the miles and cause idle issues (stalls) like yours,
Get a can of intake cleaner from any local parts store, not carb spray, intake cleaner, it is made by a company called CRC, remove the air intake hose to the engine, hold the idle high so the engine won't stall, then spray the can of cleaner into the intake while keeping the engine running, use at least 1/2 the can, shut down the engine and disconnect the battery for 5 minutes, then restart and complete a number of mixed driving cycles, town, freeway, stop and go etc., after a few days the problem will go away as the system will relearn to the clean intake
Read full answer
Oct 29, 2008 • 1993 Mazda MX-3
Not finding what you are looking for?

View Most Popular

1994 MX-3

  • Cars & Trucks

Related Question

93 Mazda Mx3 with 1.6 engine stalls while city driving after driving high speed interstate driving, what could be causing this issue? Car will start back up after a few hours and run normally.

  • 1993 Mazda MX-3

113 views

Ask a Question

Usually answered in minutes!

Popular Questions

What oil type does my car take? its a mazda mx3

1994 Mazda MX-3

Change alternator belt in a mazda mx-3

1992 Mazda MX-3

My hold button flashes and seems like the car

1993 Mazda MX-3

1993 mx3 wiring diagram

1993 Mazda MX-3

Mazda MX3 fuel filter replacement

1992 Mazda MX-3

Check Out the Latest Top Trucks Report!
Check Out the Latest Top Trucks Report!

View all Fixya Reports

Top Mazda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual
. 1994 MX-3 Manual

1994 MX-3

Loading...