Diagram for a 1993 ford escort wagon serpentine belt

The picture is for a zetec. Let me know if wrong diagram?

with a/c

witout a/c

hope this helps
Jay

This should help

Here it is. 13mm wrench to rotate tensioner

Go to http://autorepair.about.com/library/images/bl364lib.htmza
theres one

2000 Ford Escort Serpentine Belt Routing

FORD ESCORT - 1993 - L4 1.9L 116ci GAS FI N J
Belt Routing Diagram Alt., P.S., Comp., Idler & Tens.



5060535 Alt., P.S., Comp., Idler & Tens. Additional Info: Metric No : 6PK1360 Effective Length : 53.50 in. Top Width : 0.82 No. of Ribs : 6
I hope help you with this (remember rated this help) Good luck.

This information can be found at www.serpentinebeltdiagram.com
They have all the belt routing info for any vehicle with a serpentine belt.
Hope this helps....

Go on the Dayco belts web site. They make serpentine belts and a pretty good data base of belt diagrams for any vehicle they make a belt for.

2.0L Engines
See Figures 11, 12 and 13
The accessory drive belt for 2.0L engines has no provision for manual belt adjustment, since these engines use an automatic belt tensioner. Drive belt slack is taken up by the automatic tensioner.
Movement of the automatic tensioner assembly during engine operation is not a sign of a malfunctioning tensioner. This movement is the tensioner self-adjusting and is required to maintain constant belt tension.
The belt tensioner has a belt length indicator. If the indicator marks are not between the MIN and MAX marks, the belt must be replaced.
Fig. 11: Drive belt routing-2.0L SOHC engine with A/C Fig. 12: Drive belt routing-2.0L SOHC engine without A/C Fig. 13: Drive belt routing-2.0L DOHC engine