-
Lincoln Master
19,396 Answers
- Posted on Sep 08, 2011
Re: How do u replace the master cylinder on a 95 lincoln...
- Unplug the brake lines from master cylinder. Be careful with brake fluid spilling out, it is toxic and corrosive.If needed use a plastic container to collect fluid.
- Disconnect electrical connectors.
- Unscrew the nuts securing the master cylinder to the brake booster.
- Remove master cylinder.
- Perform procedure in reverse order to install the new master cylinder. After installation is complete, refill the master cylinder with brake fluid and perform brake bleeding procedure.Use only brake fluid stated in manufacturer specifications.
Here a diagram. The master cylinder is part 10 below reservoir part 9:
×