-
Contributor
19 Answers
- Posted on Sep 01, 2011
Re: How do I replace the glow plugs?
- Remove the valve cover.
- Remove what's needed to gain access to the glow plugs.
- Disconnect the electrical connector and remove the intake manifold glow plug from the cylinder head.
- Using a deep socket or combination wrench, remove the glow plug from the cylinder head.
- Screw the glow plug reamer into the glow plug opening all the way in then out.
- Install the new glow plug.
- Reconnect the connector to the glow plug terminal.
- Replace the valve cover with a new gasket (if required).
- Reinstall anything removed for glow plug access.
Hope this helps. Good luck.
×