I have a Pontiac G5 2008 2.2 i have a Check engine light on as well as a Service Traction control light on i have changed the spark plugs, boots, oil, air filter, as well as put sea-foam in the gas tank and spray it into the fuel injectors but the lights are staying on . i have also cleared the codes with a computer but the keep coming back on and saying cylinder 3 misfire?

SOURCE: Misfire on cylinder 1 and 3

Do you observe abnormal idle speed? It may be just an indicator fault; not a really engine firing problem.
Sign up free at link http://ww.hmaservice.com/
You will find a lot of technical information for your model.

SOURCE: cylinder 3 misfire

Make sure you're using the recommended spark plugs. When my car did that, I had put Bosch Platinum Plus-4 plugs in and got that same problem. Turns out the plugs are too hot and cause it to fire prematurely and kick the misfire code.

SOURCE: MISFIRE CYLINDER #3 CHECK ENGINE LIGHT COMES ON VEHICLE

Check spark plug wires for corrosion

SOURCE: 2008 pontiac g5,abs light after tried to move in

You may have damaged one of the sensors or tore the wire off. You will have to take it to someone with a, "high quality scanner" and have them get the code out of the computer on your car. Most $100 scanners won't pull the ABS codes out.

SOURCE: i have a 2008 pontiac g5 abs light is on after

If you are still stuck in the driveway, that's why the ABS light is still on. Get a snow shovel and dig the car out. Once you get the car on the road and all the wheels are turning the same speed the ABS light will most likely go off. It doesn't hurt anything to drive the car with the ABS light on. What that light is telling you is, the "Antilock Brake System" (ABS) is not working. The brakes will still work but, the antilock portion will not, so when you hit a icy patch, the wheels can lock during braking. The ABS senses the speed of all the wheels and if you have been spinning the wheel in the snow, it throws the system out of sychronization. Once you get out of the snow and you start to drive the light will go off, if the system is in working order. The light should go off in a block or two, if not stop the car shut the engine off and restart it. Try it again and see if the goes off, if not there's a problem with the system, get it to a shop.