At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Air temperature and delivery are controlled via small actuators on the heating, ventilation & air conditioning (HVAC) box located behind the dashboard. These actuators operate doors inside the HVAC box in order to channel air through different passages to achieve the desired result. A "blend" door actuator can channel air through the heater core, around the heater core or a mix of these two to achieve the desired temperature. A "mode" door actuator can direct airflow to the ducts that lead to the defrost vent, front vent, floor vent or a mix between. When a vehicle has dual climate control (where driver and passenger sides of the vehicle can have different air temperatures) there can be multiple of actuators of each type which can make diagnosis difficult. The first step would be to retrieve diagnostic trouble codes (DTCs) from the HVAC Control Module using an advanced level scan tool; these codes help determine the location of the issue and if it's an electronic or mechanical failure. Electronic failures would include items such as HVAC control module failure, actuator circuit failure or actuator failure. Mechanical failures would include items such as actuator failure or internal HVAC box door failure. You can read more here: https://www.yourmechanic.com/article/what-components-of-the-heating-and-ac-system-are-most-likely-to-fail
That is one of the mode control actuators in the rear HVAC unit, it is trying to move the mode door but is meeting resistance. You can access that area by removing several screws and removing the panel.
Need to check to see if the blower motor is running.If it is,but not threw the vents,most likely a vent door actuator motor.The actuator motor in this case would be bad,it is hard to get to,unless you are mechanically inclined,You can do it your self.If the blower motor is bad,just replace it.Check fuses first,and the blower relay.If I can help,let me know.
×