1998 Chevy S10 pickup backup lights don't work

Question 1

0helpful

1answer

Why don't my 1998 s10 backup lights work when car is in reverse, stop and tail lights work fine all bulbs and fuses seem to be good ?

if the backup bulbs are good then check the neutral switch as this is where the reverse switch is, its part of the neutral switch. it may have stopped working and need replacing. you will be replacing the neutral switch. if you have power out of the switch then check for power and ground at the light socket as there could be a bad wire or connection.

Aug 16, 2014 • Cars & Trucks

0helpful

1answer

Both tail lights are out brake and turn bulbs work. My fuses and switch is good but i have no juice to my tail lights

Check if your vehicle uses a backup/reverse/safety switch in the transmittion, this is the most common problem after fuses in vehicles with that type of switch - Jeep Grand Cherokee owner

Nov 30, 2012 • 1998 Chevrolet S-10 Pickup

0helpful

1answer

Turn Signal Problems

Usually when they flash very fast it means a bulb is bad, but if no reverse lights either it might be a short in the wires.

Jun 21, 2017 • 1998 Chevrolet S-10 Pickup

0helpful

1answer

I bought a boat and trailer and there is no cord to hook up the trailer lights. i have a 1998 chevy s10 pickup extended cab.

your best bet is to get a harness from the parts store for your truck. cost is around $30.00 but well worth it. it connects into your harness and doesnt corrode and blow fuses while your trailer is in the water

Jun 22, 2010 • 1998 Chevrolet S-10 Pickup

2helpful

1answer

1998 chevy s10 no headlights or driving lights. have turn signals and marker lights . fuses are good

this may sound stupid, but how are the bulbs, also when they are out check for power and ground at the connector. hope this might get ya going. let me know if ya need more info.

Jan 26, 2010 • 1998 Chevrolet S-10 Pickup

0helpful

1answer

1994 chevy s10 will not shift too 4x4,lights come on, on the switch, here clicking sound from tccm and that is it.

well it could be that your tccm is failing your your encoder motor on your transfer case

Sep 30, 2009 • 1998 Chevrolet S-10 Pickup

6helpful

2answers

Chevy S10 Pickup Starter. Removed the two bolts

Just changed a starter in a 94 S10 4x4. The only way to remove the starter was to take the passenger side exhaust manifold off and bring the starter out that way. Installation the same in reverse. Hope this helps. Don

Mar 14, 2009 • 1998 Chevrolet S-10 Pickup

0helpful

1answer

Ack up lights dont work when put in reverse

If all fuses are intact and someone did not fiddle with the wiring or plugged out the back up switch, then its most probably the back up switch. Its fitted on the gearbox.

Jan 15, 2009 • 1992 Honda Civic

4helpful

2answers

No tail lights

Try checking the headlight switch it may have broken contacts in it. Easy fix go to a salvage yard find same make and model truck, swap headlight switches.

Dec 27, 2008 • 1997 Chevrolet S-10 Pickup

1helpful

1answer

When I shift to Reverse my reverse lights wont work.

There is a switch on the steering colum that works the backup lights

Dec 06, 2008 • 1999 Chevrolet Blazer

Question 2

Anonymous

Contributor 1 Answer
Posted on Sep 06, 2008

Anonymous

Contributor

Joined: Sep 06, 2008

Answers

1

Questions

0

Helped

6030

Points

21

Yes it screws in on right side of tramission and you will need a 7/8 inch deep socket to remove it. You may be able to clean the old one once it is removed. There is a little ball thatgets dirty and may you can get by with cleaning it. Good Luck. Ed

Answer 2

Anonymous

Contributor 1 Answer
Posted on Nov 22, 2008

Anonymous

Contributor

Joined: Nov 22, 2008

Answers

1

Questions

0

Helped

6030

Points

5

Back up lights for a 1991 Chevrolet S10 Blazer won't come on. Changed the bulbs, changed the switch and changed the fuse. Any other suggestions?

Answer 3

Anonymous

Contributor 1 Answer
Posted on Aug 27, 2011

Anonymous

Contributor

Joined: Aug 27, 2011

Answers

1

Questions

0

Helped

6030

Points

2

Chevy blazer back up lights wont work, checked bulbs, fuses, and changed part by transmission still wont work any other suggestions?

Answer 4

Anonymous

Contributor 1 Answer
Posted on Feb 05, 2013

Anonymous

Contributor

Joined: Feb 05, 2013

Answers

1

Questions

0

Helped

6030

Points

2

Had a trailer hitch installed and when put into reverse it would blow my back up light fuse. I then cut the female receptical out of the circiut and I don't have any back-up lights. Did they wire into my harness wrong to cause a short and if they did how can I find it?

Related Topics:

1998 Chevy S10 pickup backup lights don't work

4 Answers

Anonymous

Anonymous

Anonymous

Anonymous

Add Your Answer

Attachments: Added items

Related Questions:

Why don't my 1998 s10 backup lights work when car is in reverse, stop and tail lights work fine all bulbs and fuses seem to be good ?

Both tail lights are out brake and turn bulbs work. My fuses and switch is good but i have no juice to my tail lights

Turn Signal Problems

I bought a boat and trailer and there is no cord to hook up the trailer lights. i have a 1998 chevy s10 pickup extended cab.

1998 chevy s10 no headlights or driving lights. have turn signals and marker lights . fuses are good

1994 chevy s10 will not shift too 4x4,lights come on, on the switch, here clicking sound from tccm and that is it.

Chevy S10 Pickup Starter. Removed the two bolts

Ack up lights dont work when put in reverse

No tail lights

When I shift to Reverse my reverse lights wont work.

Not finding what you are looking for?

1991 S-10 Blazer

Why don't my 1998 s10 backup lights work when car is in reverse, stop and tail lights work fine all bulbs and fuses seem to be good ?

Ask a Question

Check Out the Latest Top Trucks Report!

Top Chevrolet Experts

ZJ Limited

john h

Thomas Perkins

Are you a Chevrolet Expert? Answer questions, earn points and help others

Manuals & User Guides

Related Topics:

1998 Chevy S10 pickup backup lights don't work

4 Answers

Anonymous

Anonymous

Anonymous

Anonymous

Add Your Answer

Attachments: Added items

Related Questions:

Why don't my 1998 s10 backup lights work when car is in reverse, stop and tail lights work fine all bulbs and fuses seem to be good ?

Both tail lights are out brake and turn bulbs work. My fuses and switch is good but i have no juice to my tail lights

Turn Signal Problems

I bought a boat and trailer and there is no cord to hook up the trailer lights. i have a 1998 chevy s10 pickup extended cab.

1998 chevy s10 no headlights or driving lights. have turn signals and marker lights . fuses are good

1994 chevy s10 will not shift too 4x4,lights come on, on the switch, here clicking sound from tccm and that is it.

Chevy S10 Pickup Starter. Removed the two bolts

Ack up lights dont work when put in reverse

No tail lights

When I shift to Reverse my reverse lights wont work.

Not finding what you are looking for?

1991 S-10 Blazer

Why don't my 1998 s10 backup lights work when car is in reverse, stop and tail lights work fine all bulbs and fuses seem to be good ?

Related Topics

Ask a Question

Popular Questions

How to change a fuel pump in a 2000 chevy blazer

Dome lights won't turn off

My service stabletrack keeps come on how to fix that

What is the firing order

2000 chevy v-6 4.3 torque sequence and settings

Check Out the Latest Top Trucks Report!

Top Chevrolet Experts

ZJ Limited

john h

Thomas Perkins

Are you a Chevrolet Expert? Answer questions, earn points and help others

Manuals & User Guides