At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
All rear lights remain on after the key is removed from the ignition with the light switch off. The only way to shut the rear lights is to
disconnect a relay swith module located in the rear where all light
wires connect.
Re: All rear lights remain on after the key is removed...
Most common problem is the rubber grommet on the brake pedal, that turns the brake lights off,falls out of its position. when it comes out the brake light switch remains on.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Your best bet , take it to a qualified repair shop .
SMART ENTRANCE CONTROL UNIT PFP:28596 Description EKS003A2 OUTLINE The smart entrance control unit totally controls the following body electrical system operations. ? Warning chime ? Rear window defogger and door mirror defogger ? Power door locks ? Remote keyless entry system ? Vehicle security system ? Interior lamp ? Battery saver control BATTERY SAVER CONTROL Interior Lamp/Map Lamp/Vanity Lamps The lamps turn off automatically when the interior lamp, map lamp or/and vanity lamps are illuminated with the ignition key in the OFF position, if the lamp remains lit by the door switch open signal or if the lamp switch is in the ON position for approximately 10 minutes. After lamps are turned off by the battery saver system, the lamps illuminate again when: ? Driver's door is locked or unlocked, ? Door is opened or closed, ? Key is inserted into or removed from the ignition key cylinder. Rear Window Defogger/Door Mirror Defogger Rear window defogger and door mirror defogger are turned off approximately 15 minutes after the rear window defogger switch is turned on. INPUT/OUTPUT
Warning chime Key switch (Insert) Ignition switch (ON) Lighting switch (1st or 2nd) Seat belt buckle switch LH Front door switch LH Warning chime (located in smart entrance control unit)
Nothing for you to remove ! Without a factory scan tool U can do nothing .
TIME CONTROL UNIT PFP:28491 Description (Without Power Door Locks) EKS003A6 OUTLINE The time control unit totally controls the following body electrical system operations. ? Warning chime ? Rear window defogger INPUT/OUTPUT System Input Output Warning chime Key switch (Insert) Ignition switch (ON) Lighting switch (1st or 2nd) Seat belt buckle switch LH Front door switch LH Warning chime (located in time control unit) Rear window defogger Ignition switch (ON) Rear window defogger switch Rear window defogger relay
SMART ENTRANCE CONTROL UNIT PFP:28596 Description EKS003A2 OUTLINE The smart entrance control unit totally controls the following body electrical system operations. ? Warning chime ? Rear window defogger and door mirror defogger ? Power door locks ? Remote keyless entry system ? Vehicle security system ? Interior lamp ? Battery saver control BATTERY SAVER CONTROL Interior Lamp/Map Lamp/Vanity Lamps The lamps turn off automatically when the interior lamp, map lamp or/and vanity lamps are illuminated with the ignition key in the OFF position, if the lamp remains lit by the door switch open signal or if the lamp switch is in the ON position for approximately 10 minutes. After lamps are turned off by the battery saver system, the lamps illuminate again when: ? Driver's door is locked or unlocked, ? Door is opened or closed, ? Key is inserted into or removed from the ignition key cylinder. Rear Window Defogger/Door Mirror Defogger Rear window defogger and door mirror defogger are turned off approximately 15 minutes after the rear window defogger switch is turned on.
Warning chime Key switch (Insert) Ignition switch (ON) Lighting switch (1st or 2nd) Seat belt buckle switch LH Front door switch LH Warning chime (located in smart entrance control unit)
Does it have power locks ?
TIME CONTROL UNIT PFP:28491 Description (Without Power Door Locks) EKS003A6 OUTLINE The time control unit totally controls the following body electrical system operations. ? Warning chime ? Rear window defogger INPUT/OUTPUT System Input Output Warning chime Key switch (Insert) Ignition switch (ON) Lighting switch (1st or 2nd) Seat belt buckle switch LH Front door switch LH Warning chime (located in time control unit) Rear window defogger Ignition switch (ON) Rear window defogger switch Rear window defogger relay
The rear defro does not have power going to it with the key off. This means there is somehow a short to power to this switch, if you can remove the switch check for power at the connection. If there is power there is a short, I will send you a schematic of the circuit.
You could have a bad ignition switch. Is your check engine light on? You need to get it scanned for codes. The computer may have picked up the problem. Autozone does the test for free. It may be more then one problem. A bad ignition switch is there, when you turn the key off, your engine remains on for a few seconds. With the lights flickering, are they dimmer then usual? If so, it could be a weak alternator.
Switch off all electrical consumers, switch off ignition key and remove ignition key.
Remove rear luggage compartment side panel trim (left or right).
Remove 3 nuts, arrows, and remove housing.
Remove bulb holder.
Installing:
Install bulb holder.
Insert housing into body opening.
Tighten nuts.
Install applicable rear luggage compartment side panel trim.
Rear Light Bulb Holder Removing And Installing: Removing:
Disconnect electrical connector.
Depress retainers, arrows, and remove bulb holder.
Installing:
Install in reverse order of removal.
And the Center Mounted Brake Lamp. High mount Brake Light Removing And Installing:
The high mount brake light is installed in the rear shelf. Removing:
Switch off all electrical consumers, switch off ignition key and remove ignition key.
Disconnect electrical connector from high mount brake light.
Remove rear shelf
Un-clip high-mount brake light from rear shelf, arrows.
Install in reverse order of removal.
NOTE: The bulb holder base plate contains soldered- in light emitting diodes (LEDs) that are not replaceable. In the event of LED malfunction, replace complete bulb holder.
Additional
The ignition cylinder has a taper at the back that move the switch in whatever position. The key has to be turned back to off. It happened to me when I pulled the key out it was still half way on but then i just move it back in place. Its a sloppy cylinder from age.
Installing:
Removing:
×