Cars & Trucks Logo

Related Topics:

Posted on Aug 14, 2011

I bought a car that was in an accident and the drivers seatbelt locked. I bought a new seatbelt and installed it but i still cant get the belt to pull out?

5 Related Answers

Anonymous

  • 1010 Answers
  • Posted on Jun 24, 2008

SOURCE: seatbelt on 2007 ford fusion

It is a safety latch that is doing it's job.

If you wreck the car the belt stops preventing you from hitting the dash or going through the windshield.

Try this test to make sure they work:
Get in the car and start it,

Put your foot on the brake, and put the seatbelt on -

Now yank on the shoulder part real hard if it doesn't stop immediatly you should get it replaced.

Ad

Anonymous

  • 120 Answers
  • Posted on Sep 15, 2008

SOURCE: drivers seat belt

Good day
What you have there is called a PYROTECHNICAL SEAT BELT TENSIONER, What it does is works with the air bag system. When the sensors reads a great drop in speed as in an crash this device goes off and puts tension onto the seat beat to bring the person in the seat as tight as possible into the seat.
Hope this helps.
Now if you are having problem with one of the seat belts there could be a problem with this device, I would take it to a quality person that works on the air bag system. If not the air bag system could be tripped and then you are into a lot of $$$$ to get it fix.
When you are trying to fine some one to fix or look at this ask him or her about the Pyrotechnical seat belt tensioner system if they can explain it to you then that's good if not keep looking.

Hope this helps you out please let me know how you make out

Cheers

Anonymous

  • 11 Answers
  • Posted on Feb 16, 2009

SOURCE: 1999 honda crv seatbelt

the honda dealer can fix but charges alot. i say take off pannel (it pops off) and see if there is junk in there or if you pull it to far this will happen all the time

Anonymous

  • 109 Answers
  • Posted on Apr 12, 2009

SOURCE: drivers side seatbelt retracter will not work volvo 1996

YOU HAVE TO UNTANGLE IT IT MAYBE TRICKY BUT JUST IN MY OPINION GET AUSED ONE FOR 10-20 AND DONT FORGET TO UNPLUG NEG BATTERY CABLE FIRST UNLESS YOU WANT THE SRS LIGHT TO COME ON

Anonymous

  • 361 Answers
  • Posted on Jul 22, 2010

SOURCE: My seatbelts feed out properly and retract

There is a ball inside that when you brake moves and locks the seat belt. Your best bet is to drive and see if it locks when you brake hard. If not replace it. Some cars wont lock when you pull on them only when inertia takes over do they lock.

Testimonial: "very good info - helped"

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Hello guys after a diagnosis of my mazda cx 3 2016 i have the following results DRIVER FRONTAL STAGE 1 AND 2 DEPLYMENT CONTROL OPEN CIRCUIT. AND SECOND ROW DRIVER SIDE SEATBELT PRETENSIONER DEPLOYMENT...

Has this vehicle been in an accident? Have you taken the steering wheel off?
If No, you'll need to get this sorted as soon as possible!! These refer to the Safety Electronics on your vehicle that control the steering wheel airbag and the seatbelt system.
The one referring to the 'Driver Frontal Stage' is the steering wheel airbag trigger, (makes it go off in an accident!), and the 'Seatbelt Pretensioner' pulls the block you plug the belt into back during an impact to tighten the belt against you.
0helpful
1answer

How do I fix a locked seat belt after and accident

You should not try really. A seatbelt should be replaced after an accident like that.
.
0helpful
1answer

Seatbelts locked after wreck

It is possible that the belt is locked from the crash which activated the reel lock pin. The only way will be to replace the whole unit including the gas container.
0helpful
1answer

2009 Kia Spectra EX Driver Seatbelt locked in place

Hi Ann, Try going out to the car now and gently pulling it. If it has not released, take hold of the belt and try pushing it even further into the retracted position. That should unlock it. Regards John
1helpful
1answer

I was in a car accident and my seat belt is locked

The seat belt should be replaced. Any seatbelt that restrained a driver or passenger during a crash, should be replaced.
5helpful
2answers

How do i unlock my seat belts on my 2006 malibu after car accident

You can't unlock the seatbelts. They have an explosive charge built in that goes off like an airbag, locking up the belts on impact. You will have to replace all your locked up seatbelts.
1helpful
1answer

2008 magnum, has been in an accident and the seat belts are locked

Not 100% sure but a lot of dodge products have electric seatbelts that won't pull out without battery voltage. Check the underhood fuse box of a fuse marked seatbelts to see if it blown. Check your owners manual in the seatbelt section.
0helpful
1answer

How to increase the seatbelt pre-tension...2004 f350.

REMOVE THE COVER AND WD-4O THE MECHANISM.THE TENSION IS SET BY A MANUFACTURING PROCESS THAT YOU CANT INCREASE.ALSO IT COULD BE DEADLY TRYING TO DUE TO THE PRESET ACCIDENT LOCKING FEATURE,TRY WD-40 /IF IT WORKS GREAT IF NOT TRY A SALVAGE YARD/NEW PARTS STORE.
0helpful
1answer

2008 honda civic coupe seatbelt problem

you have to change it when air bag module deploye the air bag lock the seat belt what ever the speed our going hope it FIXYA our problem thank you pierre
Not finding what you are looking for?

26 views

Ask a Question

Usually answered in minutes!

Top Acura Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...