What are the torque specs for the camshaft bolts on a ford ranger 4L V6

It is all here complete with pictures and diagrams. A Service Manual of your own is a great investment as stated by our Pro Tech Larry Ng.

https://www.google.com/search?q=2008+chrysler+300+touring+3.5+V6+head+camshaft+bolt+torque+specs

..

The rod bearing cap bolt torque specifications for the 3.0L V6 engine in a 2000 Ford Ranger XLT 4x4 with a manual transmission are as follows:

• Step 1: Tighten the bolts to 15 foot-pounds of torque.
• Step 2: Tighten the bolts to 30 foot-pounds of torque.
• Step 3: Tighten the bolts an additional 90 degrees (1/4 turn) using a torque angle gauge.

It's important to follow the torque specifications and sequence in the manufacturer's service manual to ensure proper tightening and prevent damage to the engine.

SOHC V6 Torque Specs Camshaft sprocket bolt: (E/MWM)
Left: 63 lb-ft
Right:LHT 63 lb-ft or 45 lb-ft if using 6485 socket extension
Camshaft bearing cap bolt: (E/MWM)
Step 1: 53 lb-in
Step 2: 12 lb-ft https://www.explorerforum.com/forums/index.php?threads/sohc-v6-torque-specifications.406687/

33 ft/lbs

86 inch pounds. About 7 foot pounds.

SOHC V6 Torque Specifications - Ford Explorer and Ranger Forums ...

https://www.explorerforum.com/forums/showthread.php?t=406687

Apr 25, 2014 - SOHC V6 Torque Specifications Under the Hood. ... related to the Ford SOHC V6 4.0L engine used in Explorers, Mountaineers, Mustangs and Rangers. .... Oilpan (sheet metal) to crankcase reinforcement section bolts: 80 lb-in (E/MWM) ....Ranger Mountaineer - Sport thru '03 - 2nd Generation, 2002 - 2005 ... Transmission pan drop
5 posts
May 7, 2012
SOHC V6 Timing Chain Inspection & Repair
19 posts
Aug 10, 2010
Another transmission won't go after fluid change
19 posts
Mar 14, 2009
Help with 4.0 SOHC timing
15 posts
Mar 12, 2006
More results from www.explorerforum.com

[PDF]SPECIFICATIONS > TORQUE SPECIFICATIONS

www.askatech.com/askatechlive/forums/resourcehandler.ashx?a=5581

Jan 6, 2014 - TORQUE SPECIFICATIONS ... ENGINE - 4.0L SOHC. 2002 FordExplorer Sport Trac 4.0L Eng. (1). (2) ... Oil Pan Ladder Frame Bolts (Inside).

Torque Specifications - AutoZone

Torque Specifications

Description Nm lb-ft Axle-to-frame bolt 66 49 Axle damper-to-frame bolt 34 25 Brake caliper guide pin bolt 33 24 Differential bearing cap bolt 61 45 Differential housing cover bolt 29 21 Ring gear bolt 122 90 Tie-rod nut 91 67 U-joint spider retainer bolt 19 14 Upper ball joint pinch bolt 48 35

The bolt torque spec for the 3.0 Vulcan V6 rocker arms is 18-26 foot lbs, I always set it in the middle, so 22 foot lbs will do just fine. If I helped please rate me for fixya.com
Thanks

not sure there is such a thing. I've never seen anybody use a torque wrench on valve cover bolts. Just use a nut driver (screwdriver type) or a 1/4 inch drive ratchet, and tighten as much as you can. They don't need to be very tight.

The torque specs and tightening sequence can be found in Haynes repair manual #36071.Ford Ranger 1993-2005