I need a diagram for a 1997 Mitsubishi Eclipse 2.0 . showing from top to bottom, replacing a headgasket and need diagrams so i know what is where

https://blownfuse.co/mitsubishi/eclipse/mitsubishi-eclipse-passenger-fuse-diagram-2/
https://blownfuse.co/mitsubishi/eclipse/mitsubishi-eclipse-passenger-fuse-diagram/

Question edited for clarity and the correct name of the maker which is written on the rear of the trunk! :>D
Question moved from Heating and Cooling to the correct Vehicle category of Mitsubishi Eclipse.

Fuse 10 under the hood.

Mitsubishi Eclipse Underhood Fuse Diagram

https://blownfuse.co > mitsubishi > mitsubishi-eclipse-p...
Fuse Number Description AMP Rating 1 Fuse (+B) MAIN BATTERY FUSE 80A 2 Radiator fan motor 30A 2.4 liter, 50A 3.8 liter 3 Anti?lock braking system 60A View 23 more rows

• 
  

  Mitsubishi Eclipse Passenger Fuse Diagram

  https://blownfuse.co > mitsubishi > mitsubishi-eclipse-p...
  Feb 27, 2021 - Below is the passenger fuse diagram for the Mitsubishi Eclipse third-generation 2000, 2001, 2002, 2003, 2004, and 2005 model year.

Here!

Fuse box diagram Mitsubishi Galant

fusesdiagram.com > mitsubishi > fuses-and-relay-mitsu...

Fuses and relay Mitsubishi Galant 1997-2004. For the Mitsubishi Galant (EA) 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 model year. Fuse box in passenger ...

Fuse Box Mitsubishi Galant 2000 - Wiring Diagram

cars-trucks24.blogspot.com > 2018/02 > fuse-box-mits...

Feb. 1, 2018 - How to replace fuel pump 2000 2005 mitsubishi eclipse. For the mitsubishi galant ea 1997 1998 1999 2000 2001 2002 2003 2004 model year.

The Galant Center

www.thegalantcenter.org > showthread > 51323-Questi...

tamim13 said: 07-04-2012 02:41 PM ... 2nd picture is my fuse box (under the hood - taken from the drivers side facing the fuse box) ... I need to check my owners manual to see if the fuse diagram has an explanation of the relays as well.

My wiring diagram for your vehicle doesn't show a camshaft position sensor, neither does my online parts book.
My wiring diagram does show a top dead center sensor besides the crank sensor, and it shows to be in distributor assembly. Whether that is integrated into that assembly or can be serviced separately, I don't know?

Your car already has a fuse box diagram located on the inside of the fuse box lid. However, in case its missing from there, follow these two links and you will know everything about fuses:
1. http://mitsubishifuseboxdiagram.blogspot.com/2012/09/fuse-box-mitsubishi-eclipse-diagram.html
2. https://tearstone.com/2000-2002-eclipse-service-manual/

autozone.com sign up its free then click on repair guides .... drive train....transaxle.....then manual trasaxle....then clutch it will give you the assembly and the torque ratio for your flywheel bolts

Click on the following Link. It has the Diagrams you need.
Before clicking, let me know if this helped you.

http://www.2carpros.com/car_repair_information/year/1997/make/mitsubishi/model/galant/1997_mitsubishi_galant_timing_belt_diagram_marks.htm

Need more details, But something that would help me is if you would do a compression test. This may give me info of a possible blown headgasket. If this is the case it could be the reason for the broken hose along with the blown headgasket.

You should be able to see the diagram for the serpentine belt when you open the hood.

Bank 1 is closest to the firewall, bank 2 is in front of the radiator. Sensor 1's are on top, sensor 2's are on bottom (of the engine). Thus bank 1, sensor 1 would be above the cat closest to the firewall and bank 1, sensor 2 would be after the cat (closest to the muffler). Bank 2, sensor 1 is on top closest to the radiator (you can see it from the front when the hoods open) And Bank 2, sensor 2 is front lower. Hope this helped.