CHECK THE CARBURETOR CHOKE PULL OFF VACUUM DIAPHRAM MAKE SURE VACUUM GETTING TO CHOKE PULL OFF DIAPHRAM.IF YES EITHER CHOKE DIAPHRAM LEAKING OR NEED REPLACING OR CHOKE PULL OFF DIAPHRAM NEED ADJUSTMENT. OR NEED TO CLEAN CARBURETOR CHOKE VALVE AND CHOKE SHAFT.DONT GET CARBURETOR CLEANER ON CHOKE PULL OFF DIAPHRAM IT WILL DAMAGE CHOKE PULL OFF DIAPHRAM. REPLACE FUEL FILTER AND AIR FILTER COULD HELP PROBLEM SOME.
There are several ways to do it
a. Check carburetor if not clean pump it on the intake if that not solve try to clean it. with Lacquer thinner to dissolve the dirt.
b. Check spark plug if some are not working. In checking try to pull one by one the high tension wire and listen if the sound vary if the sound remain when pulling one wire mean you have problem with your spark plug. So replace all spark plug with the same spec.
c. or lost compression on cylinder.
d Check if you fuel filter if some dirt and replace it.
e. Clean your air filter with compressor or replace it
f. Check the clearance to the Contact Point it must have 1 mm or .8 mm spacing when not at firing mode ( just like the thin of the hacksaw blade the space of the gap of the contact point.)
401 views
Usually answered in minutes!
×