I bought a 2000 Mazda 626 with only one chip key and no remote. I bought a remote online which came with instructions for programming. However I was never able to program the remote. I have sent the remote back twice and am on my third remote but this one doesn't work either. The battery is good.
2000 Mazda 626
Note: Make SURE the battery is new.
Instructions for programming ONE keyless remote fob.
1. Open the driver’s door & leave open.
2. Insert the key in the ignition.
3. Turn the key to the on and off position 3 times.
4. Remove the key from the ignition.
5. After door open chime stops, press the door open button 3 times.
6. After chime, press any fob key twice.
7. After second chime, press any fob key twice again.
8. After third chime, press any fob key twice again.
9. Press the door open button once.
10. The car should give another acknowledgement chime.
11. Test key fob.
This DOES work. I just programmed mine successfully today, three hours ago.
1,850 views
Usually answered in minutes!
Dealer can't give me a replacement key
how do you program the key with a chip and no remote so the engine will start
×