At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
should be on the fuel rail, take the plastic engine cover off and you should see the injector rails on either side of the supercharger, got to be real close to the line towards the firewall
it flooded. step on the gas pedal fully and crank the engine; that forces it to go into a clear flood mode by turning off the injectors. it may take a little while, but it will start.
YOU NEED TO REPLACE THE CABLE AT SOME POINT IT WILL STRIP OUT THE NYLON BUSHING AT TRANSMISSON WHERE IT CONECTS TO THEN YOU HAVE A BIGGER PROB. THE CLICKING IS A WARRENING THE CABLE IS GETTING FRAIED ON ONE END
I'm not sure with that type of vehicle, but on my 91 S10 my speedometer did not work at all also. The problem with that was the sensor that plugged into my tranny was missing so it was not reading anything. If you have a sensor that goes into the tranny it may be bad or missing so in my opinoin i would try checking that.
The supercharger is how air gets into the engine. Two rotors force the air into the cylinder heads creating more pressure thus more horsepower.
Your engine is designed to run with the parts that are on it. If you change the intake manifold to one on a 3800 without a supercharger you will get into a situation where you will have to change the injectors and add other parts to make it run correctly. Not to mention the reprogramming issue.
If the supercharger is the problem try these people.
http://www.pse.us/indexpage.htm
I bought a s/c from them and it works better than the original.
go to the local repair shop...(IE.carx,midas.etc..) and ask one of the mechanics, If they will print off the diagrahm you need, they will do it for a small fee 5-10 bucks or so as long as your nice!
×