Tip & How-To about Oldsmobile Alero
I see alot of people cant figure out how to reset there oil change light on a 2004 Oldsmobile Alero/ Bravade w/o (DIC) driver information center. To do this follow the steps below.
Turn the ignition to ON, with the engine off. Fully depress and release the accelerator pedal slowly three times within five seconds. The reset is complete when you hear the chimes and the “CHANGE OIL” light goes out. If the light stays on and no chime is heard, you will need to repeat the reset procedure. Turn the key to OFF. If the “CHANGE ENGINE OIL” message comes back on when you start your vehicle, the engine oil life system has not reset. Repeat the procedure.
and its as easy as that and now you can change your oil on your own and not need a dealership to reset it for you.
Posted by Nathan... on
Mar 08, 2017 | Oldsmobile Cars & Trucks
Nov 10, 2016 | Cars & Trucks
Jul 15, 2011 | 2002 Oldsmobile Silhouette
Aug 31, 2010 | 2004 Oldsmobile Alero
4,419 people viewed this tip
Usually answered in minutes!