SAAB service light 900

pressing the CLEAR button for 8 seconds. on older 9-5 and 9-3 SID's, that you must press CLEAR once & release, then press CLEAR a second time, and hold for 8 seconds. While holding down CLEAR for this second time period, at the 4 second mark "CLEARED" will be displayed, and you will hear 1 beep. If you release the CLEAR button at this point, the DTE and MPG will be cleared out. If you continue holding the CLEAR button past the 4 and 8 second marks, you will hear a 2nd beep, and "SERVICE" will be displayed. This now means that you have cleared and reset the Time For Service message.

Switch ignition on
Press and hold clr button for 8/10 seconds
Service will appear in display after 2 beeps
Switch ignition off

push and hold clear button, you will hear a chime and display will show clear,continue holding button and service will pop up and chime again. thats it

Pressing and holding the clear button for at least 8 seconds,you will lisen 2 signals on the 2º signal service it will flash.

To clear "TIME FOR SERVICE" from the Saab Information Display, press and hold the "CLEAR" button for at least 8 seconds. A signal will be heard indicating reset. After the 21st restart of the vehicle, the "TIME FOR SERVICE" message will be cancelled.