Tip & How-To about Ford Mustang
First off disconnect the negative battery cable, then pull the headlight knob towards you, turn the knob either way to spot the notch in the plastic knob.Take an 90 degree pick and place it inside that notch on the switch.Pull the pick towards you to remove the knob with ease.Then remove the two screws on the dash bezel and then remove the bezel.Next, remove the headlight mounting nut for the switch.Then pull the switch thru the dash and remove the pigtail from the switch.Install is reverse of disassembly.Hope this tip helps!!
Open the hood of the vehicle to disconnect the cable from the negative battery terminal and expose the headlight assembly.
Remove the headlight retainer clips by pulling toward the engine compartment.
Turn the bulb holder counterclockwise to pull the bulb from the headlight assembly and disconnect the electrical connection.
Install the new headlight. Do not touch the glass of the headlight -- oil from your fingers can cause the bulb to overheat and fail.
Replace bulb holder into headlight assembly and turn clockwise to secure it. Fasten the the retainer clips to secure the headlight assembly.
3,419 views
Usually answered in minutes!
×