Plymouth Cars & Trucks - Page 5 - Recent Questions, Troubleshooting & Support

0helpful
1answer

91 Plymouth Sundance 2.2 engine. I replaced the fuel pump, fuel pressure regulator and the Automatic shutdown relay that also acts as fuel pump relay...no power getting to fuel pump...any ideas?

there is another fuel pump relay. also check oil sending unit, sometimes they are wired to shut fuel pump down upon low oil pressure.
10/25/2021 5:59:44 PM • 1991 Plymouth... • Answered on Oct 25, 2021
0helpful
1answer

I have a 1999 Plymouth Breeze and it has started

more than likely the fuel pump is shorting out.
10/25/2021 5:57:22 PM • 1999 Plymouth... • Answered on Oct 25, 2021
0helpful
1answer

92 Plymouth sundance duster 3.0 v6* engine drops battery power and will sometimes die when shifting from second to neutral and coming to a stop!

check voltage to battery with vehicle running it should be 14.25 volts .minimum 13.25volts. if voltage is not enough then voltage regulator ,and, or alternator is bad. make sure belt is not loose.
10/25/2021 5:55:22 PM • 1992 Plymouth... • Answered on Oct 25, 2021
0helpful
2answers

Dome light will not work with drivers door 1996 plymouth voyager

it is a door jam switch ,it is in the door jam normally .it pushes in to turn off and comes back out to turn light on.
10/25/2021 5:55:06 PM • 1996 Plymouth... • Answered on Oct 25, 2021
0helpful
1answer

93 voyager front wipers only work when i push the washer button.

the switch itself is bad or the wiper motor
10/25/2021 5:50:51 PM • 1993 Plymouth... • Answered on Oct 25, 2021
0helpful
1answer

Have a 99 plymouthvoyager expesso changed out b.c.m with another numbers matching b.c.m now all gauges seem to work but no crank

body control modules have to be flashed at dealer to match vehicle.
10/25/2021 5:49:28 PM • 1999 Plymouth... • Answered on Oct 25, 2021
0helpful
1answer

I had two codes come up on my 1998 Plymouth voyage p0700 7

transmission control module is malfunction
10/25/2021 5:46:12 PM • 1998 Plymouth... • Answered on Oct 25, 2021
0helpful
1answer

I changed my coil pack and my crank shaft sensor but my 99 Plymouth grand voyager will not start

check cam sensor or pickup coil in distributor.
10/25/2021 5:43:29 PM • Plymouth Cars &... • Answered on Oct 25, 2021
0helpful
1answer

1998 Plymouth breeze will turn over has no spark

check all fuses ,crank sensor or cam sensor(distributor)
10/25/2021 5:42:16 PM • Plymouth Cars &... • Answered on Oct 25, 2021
0helpful
1answer

1987 plymouth reliant starts hard after turning ignition on several times?

weak fuel pump or clogged fuel filter possible.dragging starter can cause the problem also if all the current is trying to go to starter,
10/25/2021 5:40:55 PM • Plymouth Cars &... • Answered on Oct 25, 2021
0helpful
1answer

1987 Plymouth Voyager SE 3.0 It starts but won't

I would try seafoam added to fuel Injector system maybe clogging up.of course ignition spark needs to be verified if it is actually working.
10/25/2021 5:38:36 PM • 1987 Plymouth... • Answered on Oct 25, 2021
0helpful
1answer

1996 Plymouth Voyager heater valve location ?

If there is no heater control valve visable on heater hoses ,then it does not require one. heater core could be stopped up. flush the inlet and outlet with a water hose,and bleed coolant system.
10/25/2021 5:35:08 PM • Plymouth Cars &... • Answered on Oct 25, 2021
0helpful
3answers

Hello, When I start my 1999 Prowler with a cold

Hello you might want to have your ignition timing checked yes it is electronic but still can come out of adjustment this is something you will need to take it in to have completed it is complicated and touchy if you have never done it it could be costly if incorrectly set.
9/29/2021 4:57:14 PM • 1999 Plymouth... • Answered on Sep 29, 2021
0helpful
1answer

What do you call the protector panel on the door

Trim cover or bezel.
9/21/2021 5:36:19 PM • 1997 Plymouth... • Answered on Sep 21, 2021
0helpful
1answer

Where is the fuel pump emergency shut off or relay?

you dont have one
8/6/2021 12:32:58 AM • 1993 Plymouth... • Answered on Aug 06, 2021
0helpful
1answer

How do I reinstall the alternator belt on a 91 plymouth acclaim? I dont see a tensioner and cant get the belt back on once it is bolted in place

these have a serpentine belt and the tensioner is below the alternator and requires a special tool to move it. you can try using a wrench that will fit on the belt tensioner but you won`t have much room to move it. look under the hood around the upper rad support for a decal it may still be there. if it is it shows the belt routing and were the tensioner is.
7/6/2021 3:49:45 PM • Plymouth Cars &... • Answered on Jul 06, 2021
0helpful
1answer

Looking for replacement parts for

You can get required parts from auto parts ware house site.They deals with all types of car parts. Click the link below:---http://technoanswers.blogspot.com/2011/05/from-where-to-order-car-parts-online.html -------- This should help.Thanks.Helpmech.
6/30/2021 9:01:31 AM • 1999 Plymouth... • Answered on Jun 30, 2021
Not finding what you are looking for?
Plymouth Logo

13,231 questions posted

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...