Peugeot Cars & Trucks - Popular Questions, Answers, Tips & Manuals
Peugeot 207cc crackling noise coming from black box under windscreen grille
The rattling sound from the device under the grille on the windshield of your Peugeot 207cc may be caused by a loose wire or a broken part in the electrical system. It's crucial to fix this problem right away to avoid any further damage to the car. It's best to take it to a Peugeot dealership for a checkup and diagnosis. Ignoring this could lead to bigger issues later on.
MY PEUGEOT 2001 ELYSOE 125CC WONT START IF ITS COLD
Do you mean cold weather? When was the engine last serviced? Old, dirty spark plugs and old, dirty filters can cause bigger problems than you would expect.
On really cold days try to 'Prime' the engine. My method is to use the kick start to spin the engine over 3 or 4 times before using the electric button start. If yours has a manual choke try gradually sliding it down to a lower setting once it is idling and all the way off once you are riding.
I need head bolt torque settings on Peugeot 5008(2011)
ask the maker for the service manual!! we have no 5008 Peugeot here USA, 2011 year tell your country and also tell exact engine name. do you build engines off Internet RUMORS:? really>/ exact names matter, and fuel it burns and more. 09-2016 line up ,under the hood or tell the VIN and countyPowertrainEnginePetrol:1.2 L EB2 Puretech I3 turbo1.6 L PSA EP6 VTi I41.6 L THP156 I4 turboDiesel:1.6 L DV6 HDi I42.0 L DW10 HDi I42.0 L DW10 HDi I4 with electric engine (HYbrid4)Transmission5-speed manual6-speed manual6-speed automatic6-speed automated manual
Anti pollution light on Peugeot 207 vti
If the anti-pollution light on your Peugeot 207 VTi is on, it usually indicates a problem with the vehicle's emission control system. This light may appear in different ways, depending on the model and year of your vehicle, but it usually looks like a picture of an engine with "check" written on it.
Here are some steps you can take to address this issue:
- Check the gas cap: A loose or damaged gas cap can cause the anti-pollution light to come on. Make sure the gas cap is tightened securely and that it is not damaged.
- Check the oxygen sensor: The oxygen sensor is responsible for monitoring the level of oxygen in the exhaust and adjusting the fuel-to-air ratio. If the sensor is damaged or malfunctioning, it can cause the anti-pollution light to come on. A qualified technician can diagnose and repair the sensor.
- Check the catalytic converter: The catalytic converter is responsible for converting harmful pollutants into less harmful gases. If the converter is damaged or malfunctioning, it can cause the anti-pollution light to come on. A qualified technician can diagnose and repair the converter.
- Check the air filter: A dirty or clogged air filter can cause the engine to run rich, which can lead to increased emissions and the anti-pollution light to come on. Replace the air filter if necessary.
If none of these steps solve the problem, it is best to consult a qualified mechanic to diagnose and repair the issue
How to reset the TPMS sensors light on the 2010 Peugeot 3008
To reset the TPMS light on a Peugeot 3008 from 2010, you will need to follow these steps:
Turn on the ignition without starting the engine.
Press and hold the lock and unlock buttons on the remote key for five seconds until the car locks and unlocks.
Wait for two minutes or drive at a speed of 20 km/h or more for about five minutes until the system automatically recalibrates itself.
If the light does not turn off, check the tire pressure on all four tires and make sure they are inflated to the recommended pressure.
If the pressure is correct and the light still won't turn off, you may need to take your vehicle to a professional mechanic or Peugeot dealership to have the TPMS system diagnosed and repaired.
Not finding what you are looking for?