20 Most Recent 2003 Nissan Sentra GXE - Page 7 Questions & Answers

Question edited for better English, spelling and shorter sentences. You bought an antique, it is nearly 40 years old. You are supposed to restore them and only take them to shows on Sundays :>D Yes the wheels are tuning on axle stands because there is no load. It is strange it got you home but wouldn't work the next day, but my theory is that because you were thrashing it, the clutch plate is soaked in oil from a bad main seal. Remove the clutch, see what is going on behind it. Restore it and drive it sedately. Diesels are not fast engines. https://www.google.com/search?q=1984+Nissan+Civilian+Motorhome+having+drive+issues ..

I have a 2006 pathfinder and I find you have too turn it to max or hi it heats then and then set it back to required setting

When the head gasket is blown, always fit a new replacement gasket from the manufacturer, (after the head has been checked/skimmed to get it flat again as they warp). Also new head bolts are required.

Check with your local wrecking yard to see if they are interchangeable.

The proper way to reset the ABS light in Micra is by clearing the codes with an OBDII scanner. The difficulty is that the cause of the light could be either a bad wheel speed sensor, low brake fluid, a blown fuse, or a malfunctioning ABS module. If that problem is discerned and resolved, the light should automatically go out. If it doesn't, that is when the codes must be manually cleared by a scanner. That is the best information I have found.

When you shift out of park, the emission system comes into play. I have seen this happen from bad grounding of the computer that controls the emissions system.

https://www.searchforparts.com/transmission-fluid-for-nissan-altima-2008/ There are several recalls for the transmission problems. I would check with a transmission shop to see if your car is one of them. They can check to see if the proper fluid type is being used and see if it needs to be serviced.

2010 Nissan Bluebird Sylphy 20M (cont. variable)

Automobile Catalog https://www.automobile-catalog.com > car > nissan_blue... variable) in 2010, the model with 4-door sedan body and Line-4 1997 cm3 / 122.2 cui, 98 kW / 133 PS / 131 HP (JIS net) of power, 191 Nm / 141 lb-ft of torque, ...

This model is only available in South Africa. We are in North America, so this link might work better for you. https://www.google.com/search?q=nissan+langley+exa+fuse+box+diagram

Question edited for clarity.

Nissan Note E11 EM.pdf

Academia.edu https://www.academia.edu > Nissan_Note_E11_EM_pdf Remove cylinder head assembly. J INSTALLATION ? Install in the reverse order of removal paying attention to the following. Cylinder Head Bolts K NOTE: Use ...

Nissan CR14DE (1.4 L) engine

Engine Specs https://www.engine-specs.net > nissan Step 1: 24.5-30.3 Nm; 2.5-3.0 kg·m; 18-22 ft·lb; Step 2: Turn all bolts 95-100°. After securing bearing cap bolts, make sure crankshaft turns smoothly by hand. Pros and cons: Rough idle ? Loss of power ? View full list

Nissan HR15DE (1.5 L) engine - Engine Specs

Engine Specs https://www.engine-specs.net > nissan Cylinder head · Step 1: 40 Nm; 4.1 kg·m; 30 ft·lb · Step 2: Turn all bolts 60° · Step 3: Loosen all bolts completely · Step 4: 40 Nm; 4.1 kg·m; 30 ft·lb · Step 5: ... Pros and cons: Enhanced control and reduced system friction improve response ? High power output ? View full list ..

"Secure" on a red background indicates that there is a problem in the link between Navi control unit and Audio, suggesting that there is either a Navigation system fault or the Navi control unit has previously been fitted in another vehicle

The torque settings for the Nissan Urvan YD25 engine are as follows: Cylinder head Bolts: 27Nm (20 ft lbs) Intake manifold Bolts: 7Nm (5.2 ft lbs) Exhaust manifold Bolts: 7Nm (5.2 ft lbs) Oil Pan Bolts: 7Nm (5.2 ft lbs) Oil Drain Plug: 25Nm (18.4 ft lbs) Timing Chain Tensioner Bolts: 7Nm (5.2 ft lbs) Camshaft Sprocket Bolts: 25Nm (18.4 ft lbs) Crankshaft Pulley Bolt: 215Nm (159.2 ft lbs)

https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&cad=rja&uact=8&ved=2ahUKEwjq44SoxpSCAxWllIkEHWGwB68QFnoECB4QAQ&url=https%3A%2F%2Fwww.fixya.com%2Fcars%2Ft29937392-nissan_pixo_09_need_know_fuse_brake&usg=AOvVaw3R-jXPwlDmi7TbE1eiVpsd&opi=89978449

https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&cad=rja&uact=8&ved=2ahUKEwjWpcOZxpSCAxXTjIkEHdYWAhkQFnoECBoQAQ&url=https%3A%2F%2Fwww.fixya.com%2Fcars%2Ft29937398-1994_nissan_truck_injectors_get_12v&usg=AOvVaw0zqeWktsoJCqP7EHE8Xkj4&opi=89978449

You could buy a manual for it, or you could get in the back and look. For a 2004 it is unlikely, as it is before the days of kids with iPads. https://www.google.com/search?q=nissan+presage+2004+owners+manual ...

Calm down open the radiator and add some water and leave it for some minutes and u are good to go

https://www.youtube.com/watch?v=QIni_CF3ZAM https://ride4rangers.com/bypass-nissan-immobilizer/ https://lovemyengine.com/how-to-bypass-nissan-immobilizer/ One of these may help.

You don't need to worry about the steering wheel with this as they are not connected to each other in any way. Are you getting any changes at all? OK, with the engine running, does the car feel the same when you select D or R? Do you feel the car change slightly as the gear engages and the sound of the engine slow slightly as the engine connects to the transmission? Or does the car feel the same and the engine sound doesn't change. Is it only the Shifter stick moving and the indicator light changing?

If the 2009 Nissan X-Trail right turn signal is not working even though the bulb is good, there are several possible things you can check: Check the fuse: There should be a fuse box in your car. Refer to your car's manual to find the fuse related to the turn signal. If the fuse is blown, replace it with a fuse of the same amperage. Check the four-phase speed: The relay indicator may be defective. You can refer to your car's manual to locate the switch and replace it if necessary. Check the turn signal: The problem may be with the stalk or the turn signal. If the switch is faulty, it may not send the proper signal to the indicator circuit. Check the wiring: There may be a break or short in the wiring between the switch and the light source. This will require careful examination of the wiring. Contact a professional technician: If you cannot diagnose or fix the problem yourself, it is best to take your vehicle to a qualified technician. They have the skills and tools to properly diagnose electrical problems. Remember that working on a car's electrical system can be complicated, so if you are not comfortable or experienced in car repair, it is always best to seek help from a professional to avoid problems. accident or other damage.

https://www.youtube.com/watch?v=2-Y4uxtkkaQ