20 Most Recent
2000 Toyota Avalon XLS Questions & Answers
2000 Toyota Avalon XLS intermittent starting problem
If the car does not crank at all then the anomaly could lie with the starter motor. These suckers have carbon brushes that over time will wear. Usually there are springs that keep pushing the brush onto the commutator but it is possible that the brushes are so worn that the springs have reached the max on their spring and the brushes make intermittent contact at times. That explains why it is dead sometimes and starts after you jostle the unit.
Or if you have an auto transmission you can also check out the switch that is part of your transmission that prevents car from starting unless it is in neutral. The neutral safety switch. If the latter is bogus you can either replace it or just bypass it and save the dinero.
Avalon is a great running car and ................
Need settings and sequencefor toyota 4y engine the big end and main bearings as well as top
no car told year, make or model the books on engines are by that. only
wiki said this.
OHV eight-valve
Displacement: 2.2 L (2,237 cc)
Bore and stroke: 91 mm × 86 mm (3.58 in × 3.39 in)
This engine was available either carburetted (4Y) or fuel injected (4Y-E, called the GW491Q/LJ491Q and also 4G22B for Chinese manufacture). As fitted to a 1989 Daihatsu Delta truck, the carburetted 4Y produces 70 kW (95 PS; 94 hp) at 4400 rpm (SAE net)[5] and 18.6 kg?m (182 N?m; 135 lbf?ft) at 3000 rpm.[6]
Applications
1987.09 - 1995.12 Toyota Crown (YS132, overseas specifications)
Toyota Van (Town Ace overseas specification, Tarago in Australia)
Hiace third generation (overseas specification)
1979-1988 Toyota Stout (YK110)[citation needed]
Daihatsu Delta
1993-1995 Daihatsu Rocky F95
Toyota Industries forklifts
Toyota 4Runner (Australia)
Volkswagen Taro
1985-1997 Toyota Hilux fourth and fifth generation
sorry nobody can guess the car or the country . nor the VIN.
2004 Toyota Sienna. Driver side sliding door problem.
It is not clear whether your key fob continues to work for the passenger side door. If it does not, you should replace the battery in the fob. Such batteries are available at Wal-Mart among the batteries. If the sliding door on the driver's side makes a noise but fails to open when you use the fob, the latch motor maiy have failed. If the cable in the side door has frayed and snapped, this would explain why you can manually open and close the door but the electronics won't move the door. And if while trying to close it manually, the door fails to latch properly, this is why you get an alarm. If the latch motor, cables, or any other components are malfunctioning, it could lead to the door not closing securely, triggering the alarm. Check your latch mechanism and cables. If you can determine the malfunctioning part and replace it yourself, that is cheaper than going through the dealer. Here is a service manual:
https://www.manualslib.com/manual/1061909/Toyota-Sienna-2004.html
What To Do When Your Sienna's Side Door Won't Open Or Close ' Toyota Parts Center (olathetoyota.com)
What is the engine torque settings for k3 toyota Avanza
Exactly which nuts and bolts do you need the torque settings for? Not all fasteners on an engine use the same torque setting. For example, a valve cover bolt needs a low torque setting where a cylinder head bolt torque setting will be much much higher.
If your rebuilding an engine it is usually a good idea to buy a good quality workshop repair manual which will have all the settings you need.
Not finding what you are looking for?