20 Most Recent 2004 Toyota Prius Questions & Answers

STOP engine light. There is something seriously wrong so do not operate/drive the vehicle before finding and repairing whatever is causing this light to come on!

Battery packs are replaced as a single unit, single cells can't be replaced.

A new unit is $56.00 on EBAY. Replace it yourself Google 2005 Prius left tail lamp

Check the tire toe-in toe-out & Camber w/alignment

its a/c here is a stander diagram of an a/c unit.

Error Code: P0011 Fault Location: Camshaft Position (CMP), Intake, Bank 1 - Timing Over-Advanced/System Performance Possible Causes: -Valve timing. -Mechanical fault. -Camshaft position (CMP) actuator. -Camshaft Adjustment Valve 1 faulty.

You have the engine control system computer scanned for fault codes as a first step to diagnosis and repair.

I have toyota prius i got code $7e8 engine code whats that means please

Did you replace the master window switch control on the drivers side?

Does it say it itself?

When I had that problem with the emergency light it was the sensor for emergency brake The abs and brakes sounds like you are loosing pressure in the system

Drive slowly and carefully to preferably dealer or your favorite auto parts store and ask them to read the error codes.

immobilizer ?

is the car battery flat,not the battery pack thats behind the back seat for the hybrid motor,as prius get flat batteries like a normal car if yo leave something on or because its 5 years old,I work for Toyota in Australia and thats usually the only issue but people get stressed because theyre hybrids,but get a good battery dude rehearsed in Prius to change it not backyard eddy

EOBD II Error Code: P0016 Description: Crankshaft Position (CKP)/Camshaft Position (CMP), Bank 1 Sensor A - Correlation Indication: Malfunction Indicator Lamp (MIL) ON. Solutions: Wiring. Crankshaft position (CKP) sensor. Camshaft position (CMP) sensor. Mechanical fault. Timing Issue. Camshaft Adjuster. Checks: Check Setting of Timing Belt. Check Timing of Intake/Exhaust Cams. Check Cam Adjusters as per Repair Manual.

Has the vehicle ever been involved in a wreck. If yes, it may have shorted or crossed power wires.

have a friend press on the brake pedal while you open the bleed screw . If you are getting fluid out then it will be that the cylinder pistons are seized in the cylinder.. Have an accredited brake specialist shop check it out.