20 Most Recent 2003 Toyota Tundra - Page 5 Questions & Answers

0helpful
2answers

Radio will not iluminate at night

U will need to pull the radio out of the dash and remove the top cover of the radio chassis, under that cover there is a tiny light bulb in a little socket that twists into the back of the dial display, the bulb looks like a miniature peanut, this is the back light for the radio display, u can buy the bulb at any full service parts store or at the dealer, about $1
8/8/2012 1:34:06 AM • 2003 Toyota... • Answered on Aug 08, 2012
0helpful
1answer

Toyota tundra ac cycling on and off?

you need to put gauges on it to see what its doing wouldn't be over charged unless some add to it with out knowing how much it had a low charge can make it cycle as well
7/11/2012 1:25:00 AM • 2003 Toyota... • Answered on Jul 11, 2012
0helpful
1answer

I have a 2005 tundra replaced blower fan now no power need to know where to find all the fuses are for this.

Under the hood in the fuse and relay center. Check your owners manual, if you don't have one go here
7/9/2012 6:11:03 PM • 2003 Toyota... • Answered on Jul 09, 2012
0answers

Seat belt light

Be the first to answer 6/22/2012 11:05:23 PM • 2003 Toyota... • Posted on Jun 22, 2012Be the first to answer
0helpful
1answer

03 tundra makes a noise when making left turn

maybe the ball joint or tie rod check it .
4/20/2012 5:34:27 PM • 2003 Toyota... • Answered on Apr 20, 2012
0answers
0helpful
1answer

2003 toyota tundra put new battery in but still dead by next morning

Yes I went nuts with the dead battery problem till I found TSB_EL015-03. Seems the frist half of the production year 2003 Tundra has a problem with the tow package relay being left energized if you leave the lights in the daytime running position so that they turn off by opening the door, it will run the battery down.Toyota knows this, won't do a recall, but there is a kit you can get that is listed in the Technical Service Bulletin EL015-3. When it tell you to use a special tool to remove a pin from the large connector (red) don't bother, you will never get it out. Just cut the red wire and use a crimp tool to splice it to the kit's wire. There is no room to work it, just cut it and splice it.http://www.toyotanation.com/forum/123-truck-archive/74107-2003-battery-draining.html
3/20/2012 2:13:42 AM • 2003 Toyota... • Answered on Mar 20, 2012
0helpful
2answers

I have p00031 and 51 what do I need to replace

I looked up the code on another site which I cant remember. POO31 and 0051 are the codes for the front o2 sensors.
2/28/2012 10:11:53 AM • 2003 Toyota... • Answered on Feb 28, 2012
0helpful
1answer

I recently put new front brake pads and had rotors turned on the front end of my 2003 tundra sr5,after a month of driving i'm getting the pulsation when braking back which is why i made this repai

HI if you have pulsation after a month you must replace the rotors they are too thin and the heat is warping them faster then before youhad them turned note you replace brake pads and rotors good luck
2/20/2012 2:14:55 PM • 2003 Toyota... • Answered on Feb 20, 2012
Not finding what you are looking for?
2003 Toyota Tundra Logo

312 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Toyota Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Tundra Toyota

  • Tundra Toyota

Most Popular Question

code p1138 2003 toyota tundra fix

  • Cars & Trucks
Loading...