20 Most Recent
2002 Toyota Corolla - Page 4 Questions & Answers
Engine Fan Not working ?
fuse, broken wire, fan broken, temperature sensor malfunction, coolant level. More info is needed to help more.
Oxygen sensor location
There is an O2 sensor right on the exhaust pipe at the front of the engine. Make sure that's the sensor that's bad.
Tyre Pressure and ABS
By operating the tire pressure warning system reset switch, tire pressure warning system ECU can be set to issue a warning at an inflation pressure that corresponds with the type of tires.
Operate the tire pressure warning system reset switch only after the inflation pressures of all 4 tires have been adjusted on the vehicle.
To initialize the system, press and hold the tire pressure warning system reset switch for 3 seconds or longer with the power switch turned IG-ON. When starting the initialization, the tire pressure warning light blinks 3 times at 0.5 Hz.
During the initialization, the tire pressure warning system valve & transmitter measures the inflation
pressure of the tires, and registers the signals that are transmitted into the ECU at a frequency of 1 per
minute. The initialization process is completed when the signals from the tires have been received.
Once the tire pressure warning system reset switch has been pressed, do not turn the Ignition switch OFF for a few minutes.
My heater plugs don't work
heater plugs.?
now were might those be?
do tell what you are heating?
is this in Alaska and bock heaters?
what?
oxygen sensor heaters
seat heaters
point finger to them , ahhhhhhhhhhhhh?
Crankshaft sensor location
on the block close to the sump and flywheel on the front side of the engine it may differ on other engines above is for X18XE
Not finding what you are looking for?