2000 Toyota Avalon - Answered Questions & Fixed issues
A rat chew through my tail light wires on my passenger side of my 2000 Avalon and I want to splice them together do you have a wiring diagram
If they all look the same then a wiring diagram wouldn't help much. May I suggest that you get a 12 volt test probe/light and find out which of the 3 white or green are Positive and which are negative. Once you know that, if these are the only wires going to the tail light, one each should go to the brake light, parking/driving lights, and reverse light. Now you can simply trace the wires to the individual bulbs to know how to connect them. Additionally, wires usually follow a path and even when broken/chewed apart, you can sometimes identify which wire goes to the other by the positioning.
8/30/2021 2:40:11 AM •
2000 Toyota...
•
Answered
on Aug 30, 2021
•
122 views
I have a 2000 toyota avalon and the woofer speaker
I bought a refoam kit from Midwest Speaker Repair - found them on eBay. Cost $23.50, including shipping. Had it in two days. Very easy prep and installation. I think the subwoofer sounds better than new, but I could be wrong. Best way to go. Worth every penny.
6/22/2019 8:38:50 PM •
2000 Toyota...
•
Answered
on Jun 22, 2019
•
1,652 views
Causes of p0300, p0302, p0304, p0306 in 2000 toyota avalon
P0300 = Random/multiple cylinder(s) - misfire detected.
P0302 = Cylinder 2 - misfire detected.
P0304 = Cylinder 4 - misfire detected.
P0306 = Cylinder 6 - misfire detected.
A misfire can be caused by a few things. The most common causes are usually spark supply or fuel supply. Get BOTH of these checked.
All the misfires are on the same side of the engine so I would suspect a fuel rail or an injector issue on that side of the engine.
3/4/2019 7:44:00 PM •
2000 Toyota...
•
Answered
on Mar 04, 2019
•
1,300 views
Relay for door locks
There are no relays in this system. The door switches communicate with the drier door ECU. The ECU communicates with the body control module and the BCM toggles + and - to the power door locks.
1/22/2018 5:15:35 PM •
2000 Toyota...
•
Answered
on Jan 22, 2018
•
123 views
I replaced my steering column to my 2000 Toyota avalon got the key programmed but my car won't start
If the work was done correctly and the key correctly programmed it would seem the car developed an unrelated fault sometime during the replacement. That isn't impossible but it is a bit unlikely so the chances are greater there is either something wrong with the work or doing the work has created a new fault or the key programming wasn't good.
I suggest you revisit the work and double check everything as a first step.
4/2/2017 9:48:40 PM •
2000 Toyota...
•
Answered
on Apr 02, 2017
•
158 views
Not finding what you are looking for?