Can anyone please tell me what this warning light means and what might have to be fixed along with estimated costs?
That is the tire pressure monitoring light. Simply air up your tires and it will turn off. If it comes back on then you may have a slow leak.
Posted on Aug 26, 2008
I need to program my remote control for my car alarm but I don't have the manual. Can you help me ?
product: user manual for omega freedom 150 car alarm
I'm assuming you need the user manual here?
here is a link:
http://www.omegarep.com/All%20PDF/Free-150%20Manual.pdf
Posted on Oct 24, 2008
how to disable engine immobilizer system?
you cant, without a good bit of effort. you would have to reprogram the body ECM and engine ECM as it is tied into both
Posted on Nov 24, 2008
my radio and lighter stopped working and i would like to replace the fuses. please help me locate the fuse box for both? the car didn't come with an owner's manual.
Also, for radio, cigarette, and others: behind the "storage only" box left of steering wheel. Pull that door open, up and out.
Posted on May 06, 2010
When de-activating the standard, factory fitted, alarm on my Corolla 98 module, the car still does not start.
When alarm is activated no power is provided to the starter, and when turning the key nothing happens.
Now, with alarm de-activiated power is given to started, and engine does turn, but does not start. I have check the distributer, and could not find any problems with it. Have checked spark-plug, no problem with plug, but it seems as if no fire is send though, to egnite the fuel. "Yes there is fuel in the car". We have removed one of the spark-plug and turned the engine, no fire (spark)
Could this be an immobilizer failure, or what can it be, and how can I fix it.
Simple thing to do is have your coils checked.. You should have spark if they are good.. If you still dont then disconnect battery at least 20 - 25 mins see if it resets ecm and alarm. May begin to work properly again..
Posted on Jul 06, 2009
1998 toyota corolla rear door lock actuator not working. How do I remove old one? Can it be replaced by so-called ''universal' lock actuator?
Thanks
You can replace with any of "universal" actuator.
Its just a small motor inside power door lock, that works up and down according to the electricity that come into it. Good luck !
Posted on Sep 06, 2009
Diagram of firing order for 1998 Toyota corolla
1998 Toyota Corolla LE Sedan 1.8 liter DOHC L4 (1ZZ-FE)
Hope this helps (remember rated and comment this).
Posted on Sep 10, 2010
fuse panel diagram for 1998 toyota corolla
need diagram for a 1998 toyota corolla fuse box
Posted on Jul 21, 2012
Where do i locate the temp sensor on 98 corolla
I suggest check the follow diagrams, according with your engine:
Fig. Component locations - 1996-98 5S-FE engine (zooming link)
Fig. Component locations - 1996-98 7A-FE engine (zooming link)
Fig. Corolla component locations - 1.8L I4 MFI 1ZZ-FE VIN R (zooming link)
Hope this helps; also keep in mind that your feedback
is important and
I`ll appreciate your time and consideration if you leave some
testimonial comment about this answer.
Thank you for using FixYa, have a nice day.
Posted on Feb 07, 2012
I ran the code reader and got P0440 then after I I/M monitors and got the 4 n/a
Just Had That Problem And It Was The Cat
Posted on Jul 18, 2021
1,784 questions posted
Usually answered in minutes!
1,240 Questions
1,236 Questions
819 Questions
767 Questions
792 Questions