My clutch won't enagage gear on my 98 corrola at low speed. I cannot change gear sometimes and car will stall. This has only just started happening, Can you tell me what the problem is?
Hi, it sounds like the clutch is dragging (not disengaging fully) first, check for air in the system, will need to open the bleed nipple on the slave cylinder, watch for any air, but do not let the fluid level in the reservoir go down to far, if no air, check that the fluid in the hydraulics is the correct type, check to see if the fluid is clear or slight lemon colour, if it appears black then hydraulic system must be cleaned out and seals checked, and replaced, or master and slave cylinders replaced, next check the adjustment and correct amount of clearance at the pedal and below on the slave cylinder. I take that the clutch is not slipping under power, if it is and clearances are correct the clutch will need to be replaced. Hope this helps, P
on Sep 17, 2014