20 Most Recent
1993 Toyota Land Cruiser Questions & Answers
1992 80 series land cruiser 1hdt pushing coolant
Just two possibilities. First would be the air wasn't purged completely out of the system. Second is a blown head gasket. And yes, I have seen a good pressure test on the coolant side (15 to 18 PSI). But the pistons throw out 100+ PSI. Check or have checked, the coolant system for exhaust gas. There is a test for it.
Firing order on a 93 land cruiser
Hi Jessica:
If this is the straight 6 cylinder motor, they were basically very similar to the chevy. The firing order was 1 5 3 6 2 4
If you look at the distributor, find the number 1 plug wire, and then check from there it should confirm it for you.
Gotta love old chevys!
Any trick to swapping a backup sensor?
The lights need to be grounded as well and there could be a bad ground in the harness but you could always put a ground from the lights to a good clean spot on the chassis.
Vacuum pump hoses
if the hose is about 1/2 inch and about afoot long and has oil inside of it probably is an oil return line back to the sump. If it is clean inside it will go to a item requiring vacuum like a governor or a brake booster.
Not finding what you are looking for?