20 Most Recent 2006 Toyota Highlander - Page 3 Questions & Answers

you will need to hook up a scan tool, I know many parts stores will loan you one or let you use it in the parking lot, VSC could have something to do with a wheel mounted speed sensor, did you hit something? any noises, try this and see if it goes away

1. • 1 Shut off the vehicle's engine and apply the parking brake to protect yourself while working on the vehicle.
   • 2 Open the vehicle's hood and examine the engine compartment. Locate the air filter box mounted to the left of the engine. The air filter box features a black exterior, square in shape, and a large ribbed intake hose.
   • 3 Check all of the small black vacuum lines surrounding the air filter box. Reconnect any disconnected or loose vacuum lines you find.
   • 4 Start the engine and drive the vehicle to clear the "VSC" warning light displayed on the dashboard. If the VSC light fails to go out after driving the vehicle normally, proceed to the next step.
   • 5 Park the vehicle, turn off the engine and set the parking brake. Open the vehicle's hood and disconnect the battery's negative cable for 15 seconds, using an appropriate size socket. Disconnecting the negative battery cable will reset the vehicle's computer and clear the "VSC" warning.

i would chande the plugs at or around 60,000 to 70,000 miles. this is about the correct mileage. they may last longer but not worth the expensence of converter damage due to misfire and also gas mileage loss.

Yes, the cartridge is on the side of the condenser. It can be replaced without replacing the condenser. The expansion valve is on the firewall where the lines go to the evaporator.

Here's a link to remove the caliber. Repair Guides Front Disc Brakes Brake Caliper AutoZone com Here's another link to remove the rotor. Repair Guides Front Disc Brakes Brake Disc rotor AutoZone com

P0402 code - EGR volume control valve stuck open - Faulty EGR volume control valve - EGR solenoid valve harness is open or shorted - EGR solenoid valve circuit poor electrical connection - Faulty EGR temperature sensor and circuit Read more: http://engine-codes.com/p0402_ford.html#ixzz3GmcSmjC2

123456

PURCHASE A BOOK AT THE PARTS STORE

The easy way to find out what was the positive or the negative without knowing the wire color code or without using the tester,,,is.. cut the bulb's line you want to know. Scratch them one by one to the unpainted vehicle's body,,If the wire has built a spark?.. That is the POSITIVE.

This is just a forum or chat room--- from home Have to ask a repair shop You never ask a repair shop about ballpark or average prices,they think you looking for cheap & will take your business elsewhere

200 cubic inch

Once ALL tires have the proper amount of air pressure in them the computer will reset the light. This may take as long as a couple of days (depending on how long you drive the car). Some take as long as 30 minutes of continuous driving to reset. However, you need to be sure that ALL tires are properly inflated, EVEN THE FULL-SIZED SPARE, if you have a full-sized spare tire.

For this VCS and traction lights coming ON,its advisable to check/click this help links :----VCS maintenance required ? http://howtobyme.blogspot.com/2011/11/vcs-maintaince-required-on-toyota-camry.html------- VCS and ABS lights go on and off intermittently? http://howtobyme.blogspot.com/2011/11/vcs-and-abs-lights-go-on-and-off.html--------Traction control message? http://schematicsdiagram.blogspot.com/2012/01/traction-control-message.html---------The ABS and Traction Control Lights stays ON dash of car? http://schematicsdiagram.blogspot.com/2011/06/abs-and-traction-control-lights-stays.html----------This will help.Thanks.

Have you checked the rubber door seals for ingress?

thats a hard job make sure you have a extra strong helper to do this since the door is very heavy. you will more then likely have to remove door to get to it or do with door closed don't always work.

Many cannot be removed or unscrewed. If it is telescopic, shorten it as much as you can. If not and you are still concerned, visit a handwash facility. These are common.