20 Most Recent 2005 Peugeot 405 - Page 9 Questions & Answers

The turn signal bulbs are bad, and yes probably both. To Test, swap bulbs from the right indicators to the left

i don't know what error 2 is. It might mean that you tried too many attempts to enter the code, causing the radio to 'lock up'. When this happens, some radios 'auto clear' the error code after a fixed period of time (anywhere from 3 hours to a couple of days). Others can't be cleared without sending the radio back to the manufacture (but try simply disconnecting the battery, and reconnecting it, first) 
Assuming that you can get back to the position where you can enter the code, here's how to do it. I'll use the code 4968 for my example: 
Press button 1, 4 times 
Press button 2, 9 times 
Press button 3, 6 times 
Press button 4, 8 times 
Press button 6.

try leaving your ignition on for an hour or so and see if the error 2 message changes to the option where you have to input a code.

check you peugeot manuals to see if the previous owner has noted the code down if not hopefully you should have a stereo manual whihc will have the serial number on it .if not then you will have to remove the stereo and get the serial number off the back.
if you take the serial and logbook to a peugeot dealers they will beable to give you a code usually free.

let us know how you get on and please rate 

Sorry i can't help,re-post the question and see if someone else can,citroen relay??? I don't know what you need.

Your jets are clogged up, if you have an air line or access to one, blow out the lines from the nozzle near the wipers, it should clear it up. Pop the hood up and pull a hose off the Y fitting so that the junk doesn't get back in the jets. Then put the hose back on and give it a try, hope this helps.

hi ive a peugeot 206cc 02 reg, the STOP light keeps flashing ive checked the normal oil and water but alls ok so whats the problem still runs fine and temp stays where it should??? any tips??

this just happened to us, the drivers side stopped working after getting tangled up with the passenger side...it was just a case of tightening up the 13mm nuts on the wiper arm.