1999 Lincoln Town Car - Answered Questions & Fixed issues
1999 Lincoln Town Car shakes at idle. Cylinder 5 misfire and bank 1 and 2 too rich.
AC has nothing to misfires or o2 sensors.
Start with the basics.
Check the spark plugs, or perhaps just replace them all. Or you can test, put plug 5 in plug 1 swap. Does the misfire move? If it does, the plug is the issue, if it doesn't is is the coil pack to it.
Clean throttle body and MAF.
Clean EGR
Run car for a week, and if it is still running rich, change the sensors.
OR, just go to an auto-electrician with a $5,000 scan tool computer although with a 1999, the data will be fairly basic but will diagnose.
https://www.google.com/search?q=1999+Lincoln+Town+Car+shakes+at+idle.+Cylinder+5+misfire+and+bank+1+and+2+too+rich
..
..
4/4/2022 11:06:26 PM •
1999 Lincoln...
•
Answered
on Apr 04, 2022
•
152 views
1999 Lincoln towncar drivers side window won't
The box you're referring to is the "driver's side door control module" if it operates when you press on it you might just have a loose solder connection on the pins. Obviously, you've already removed the inner door panel, so...
1. Unhook neg batt cable
2. Loosen the top screw
3. Press the bottom retaining clips on both sides in and pull back, or just pull back, the screw holds it in and the slots keep the thing steady.
4. Refrain from smashing everything and burning the car to the ground
5. Lightly unclip the three clasps holding the control module board in its housing
6. Visually check for damage, discolouration, loose or broken connectors.
7. Repeat step 4 if you don't find anything
8. Multimeter check or
9. Online parts search
10. Forget step 4.?
7/11/2019 9:54:28 AM •
1999 Lincoln...
•
Answered
on Jul 11, 2019
•
234 views
I need to cahnge the
The seat track you need will have to either need power or be aligned so you can reach its' mounting bolts too. You will be able to see how the gear drive is attached on the replacement seat track. You may be able to unbolt the gear drive from the track on your damaged part. Then the seat should slide either way without the drive gears stopping you from moving the seat. Sometimes there is only room for a air ratchet to fit as the bolt can spin without having to move the ratchet handle.
10/12/2017 4:15:52 PM •
1999 Lincoln...
•
Answered
on Oct 12, 2017
•
378 views
Not finding what you are looking for?