20 Most Recent
1989 Jaguar Vanden Plas - Page 3 Questions & Answers
Remove/replace starter sloenoid
your
Ignition Switch is bad here is how to replace it
The ignition switch is usually mounted to the steering column and is
operated by a linkage rod.
NOTE
On column-mounted ignition switches, don't confuse
the switch with the lock cylinder and keys. The ignition switch is not
normally visible.
On some vehicles, the steering column support has to be removed and
the column lowered to find the ignition switch. On others, the switch is
accessible under the dash.
The ignition switch is operated by the key
switch. Courtesy of Ford Motor Company.
To replace the switch:
- Remove the ignition switch wiring harness.
- Unbolt it from its position.
- Bolt the new switch into position.
- Attach the witing harness.
I just bought a used
use wd-40 or liquid wrench and a tooth pick- use toothpick to hold the little metal flap in lock back and spray oil inside- locks weren't uses much as you have remote locks- lack of use can cause rust/lockup
key will start engine? if not- you might have gotten the wrong keys- or there might be a different one for the door locks from the ignition key
Not finding what you are looking for?