Top 10 1999 Kia Sephia Questions & Answers

need idagram for belt routing there is no picture on the new belt package nor a diagram under the hood
I did usea hayne repair manual how ever you can read how to but stil know diagram

I was facing a similar problem when I bought my car, I think the "check engine" lit due to a problem with shifting control system which obviously made the "O/D-off" flashes.The best solution in this case is to replace the malfunctioning shifting control system (a closed steel box that works like a computer).This is what I did and since then it's running perfectly.

The four speed automatic shows a total fill (that is all the fluid it can hold) is 5.7 Quarts. So if you just dropped the pan and relplaced the filter, you shouldnt need more than 4 quarts and likely you would have a little extra with that.

dexron 3

do a compression test. cylinder 3 could have a bad valve lifter or valve.kia sephia dont have push rods.it have a bucket type followers.a intake leak to that cylinder can also cause misfire problems.

Here you have the Fuse Cover pic.

Also, here can search the Owners Manual

I hope helped with this (remember rated this help).

The inside of the fuse box cover has a small diagram, also the manual has one. As for finding one online, I haven't seen one.



Also I suggest check your Kia Sephia Owners Manual.

Good luck (remember rated and comment this).

the main relay is in the fuse box under the hood egi stands for electronic gas injection. its the main relay for the fuel injection system

Est? al lado del filtro de aceite detr?s del motor, hay que acceder a ?l desde abajo.

Fig. Starter mounting-1.5L and 1.6L engines

For 1.8L...

# Desconecte el cable negativo de la bater?a.
# Retire los 2 tornillos superiores del m?ltiple de admisi?n soporte.
# Desconecte las conexiones el?ctricas de arranque.
# Retire los 2 tornillos de arranque superior.
# Retire el tubo de escape.
# Retire el menor consumo m?ltiple de perno soporte y el soporte.
# Retire el perno inferior de arranque y el arrancador.

Contrariamente a lo que est? escrito en los manuales Chilton, NO HAY NECESIDAD DE RETIRAR EL SISTEMA DE ESCAPE PARA CAMBIAR EL MOTOR DE ARRANQUE!

Suerte (recuerde calificar esta ayuda).

For all types of car headlights repair and service issues.Click the link below and follow the troubleshooting:----All headlights not working? http://repairhelpcenter.blogspot.com/2012/01/all-headlights-not-working.html
--------headlights flashes while start? http://technoanswers.blogspot.in/2012/02/hummers-headlights-flashes-while-start.html
---------Headlights flickering and car hesitates to start? http://howtobyme.blogspot.in/2012/02/headlights-flickering-and-car-hesitates.html
----------Both headlights and turn signals not working? http://schematicsdiagram.blogspot.com/2011/12/both-headlights-and-turnsignals-not.html
--------Headlight wiring diagram ? http://technoanswers.blogspot.in/2012/02/headlight-wiring-diagram-for-1997.html
---------This will help.Thanks.