20 Most Recent 2004 Infiniti G35 Sport Coupe Questions & Answers

I am having the same problem. My brake lights work but my taillights do not and I don't know what to do I have changed all the fuses under hood and by the brake pedal PLEASE PLEASE PLEASE LET ME KNOW IF YOU FIGURE OUT WHY my car is 2004 g35

Where are the running light fuse located in a Infiniti g35 2003

well you can put key in door turn to lock hold few secs to see if that will move window up. try helping glass up, if does not move at all then not training issue, if moves part way then retrain it.

There should be manual release cable inside the trunk behind the trim panel near the gas door location.

The dealer or a reputable independent repair shop that works on high end Japanese cars. The shop will only update the computer if there's a software update that pertains to your particular problem. Find an independent dealer shop: iatn.net

coin stuck

the alarm will be deactivated by key in door lock unlock, the no start is not alarm, check security red led is on, indicating key programing needed

Check the battery cables and battery to starter cables for corrosion and tightness .

Blown fuse or bad switch. Turn on lights and check for voltage at each light socket

Only Ford products have that switch.

caliper may be starting to seize.

Usually same as wipers? around 20-30 amps maybe

03 and 04 G35's had a Technical Service Bulletin regarding the audio system circuit board. I would suggest calling your nearest dealer with your VIN number in hand and ask if the Circuit board has been replaced. If it has it could still be the issue. The radio unit itself could be bad too. I worked for an Infiniti dealer for 10 years and we replaced a lot of circuit boards, and quite a few radio units. On those vehicles, however the radio is not like the radio on most cars. The display is one part, connected to the console, behind that is the circuit board and behind the board is the radio, which is nothing more than a square silver box. More than likely this is going to be a dealer only repair as is the case with most of the newer Infiniti models. 

code p 0327 refers to knock sensor (KS) 1 bank 1---low input===causes ---insecure KS, poor connection---wiring short to ground---incorrectly tightened---KS---ECM check all the wires for good connections and the fitment of the KS replace the KS if all other items check out ok