Top 20
1999 Mercury Mystique Questions & Answers
1999 mercury mystique were is the kill switch
In the driver's footwell behind the kick panel , where the access hole is .
The Inertia Fuel Shutoff (IFS) Switch is located behind the trunk release lever and behind the plastic panel.
Have no heat
Check the heater hoses to see that they are getting warm. If so, flapper door which directs air to go through the heater core may be inoperative due to bad actuator or vacuum leak.
How to replace serpintine belt on 1999 mercury mystique 4 cyilender
first make sure you have the correct belt for the application. then make sure you are installing the belt the correct way, going to and around the correct pulleys. there should be a decal under the hood somewhere that shows the routing of the belt it may still be there and not missing.
Why does my 1999 mystique will crank and run but runs rough
Sounds like your idle valve has stopped working . Does it run fine when warmed Up? If so I would clean the throttle body and remove the idle valve and clean it. After reinstalling it have someone turn the key on while you tap the idle valve lightly with a screw driver Handel. Then see if it will idle when started. If it does then you need a new one.
Removing ignition switch
Unfortunately you have to have it in the on position for the release pin to push in so you can remove the tumblers.
Not finding what you are looking for?