20 Most Recent 2006 Chrysler Executive - Page 7 Questions & Answers

Check to see if the master switch is getting power. Check the main feed wire that goes into the door from the dash area.

Chrysler Cars &... | Answered on Jul 23, 2019

Not that easy. Need year, make, model, and vin number.

Chrysler Cars &... | Answered on Jul 22, 2019

There should be a over ride slot in the dash above the shifter that allows you to override the lock out. Also check the fuses. May have blown one when changing the battery. Your manual should have this information.

Chrysler Cars &... | Answered on Jul 18, 2019

I have encountered this problem a couple of times and the cause was fluid leaking from the brake master cylinder entered the brake booster (something that should not happen) and the resulting contamination put it in a thoroughly bad mood, causing it to suddenly apply the brakes with maximum force.

It is possible, I suppose, a fault with the traction control system/ESP/ABS could conceivably be a cause (if your car is fitted with these things) but I haven't heard of this.

Chrysler Cars &... | Answered on Jul 18, 2019

Something different. There are multiple shift solenoids inside the transmission. Take it to a reputable transmission specialist and have them give you an estimate.

Chrysler Cars &... | Answered on Jul 17, 2019

It should be right on top of the low pressure line by the passenger strut tower under the hood.

Chrysler Cars &... | Answered on Jul 16, 2019

Aspen limited hybrid, 5.7L engine. Front wheel drive, the starter appears to be on backside of engine, down low. You'll probably have to safely raise and support the vehicle to get at starter motor. Anytime your working under a vehicle there are safety issues, safety is your responsibility. This database isn't always correct, if the picture is wrong, my bad.

Chrysler Cars &... | Answered on Jul 15, 2019

You will get the vacuum diagram from the given link Home Toolsnyou

Chrysler Cars &... | Answered on Jul 12, 2019


Chrysler Cars &... | Answered on Jul 10, 2019

Po171 is a lean code.
Miscalibrated 02 sensor-- exhaust leak
intake vac leaks or incorrect map valve
or low fuel pressure/volumn.

Chrysler Cars &... | Answered on Jul 09, 2019

Start with the basics like checking for spark and fuel pressure.

Chrysler Cars &... | Answered on Jul 09, 2019

All light power goes through your light switch. You can go to any auto parts store and buy a Haynes Manual for your vehicle. It will contain wiring and vacuum diagrams. You can also find the manuals on Amazon and eBay. I would guess your light switch is bad. Being so old if you can't find a switch try www.Rockauto.com

Chrysler Cars &... | Answered on Jul 07, 2019

I'm pretty sure that Chrysler never built, or imported, a car with a 3-cylinder engine in the 1970s. If some cylinders have spark, but others don't, I'd start with a new distributor cap and rotor, followed by a new set of spark plug wires. All of those are pretty cheap, especially online -- try rockauto.com.

Chrysler Cars &... | Answered on Jul 07, 2019

Not finding what you are looking for?
Cars & Trucks Logo

5 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chrysler Experts


Level 3 Expert

85216 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Executive Chrysler

  • Executive Chrysler

Most Popular Question

tengo una liberti sport 2002 y de

  • Cars & Trucks