20 Most Recent 1998 Chrysler Town & Country - Page 6 Questions & Answers

I have never seen this and it is not a common problem. Electrolysis is not really a problem on brake system components.

I doubt it on something more than 10 yrs old.You can research the internet for service bulletins or contact customer service at Chrysler.

Replace the temp sensor and see if the fan begins to work. If it doesn't then you'll have to replace the fan.

fluid is low probably due to worn brake pads. factory specs are dot 3 fluid. fill to full line. may need a flashlight and a funnel to add the fluuid. hope this helps

If the caliper is hanging up and not releasing, check the flex hose for that wheel.

The P1404 mean IA T-B Circuit Malfunction/Exhaust Gas Recirculation Closed Position Performancexvci xtool

check the relay they stick on

http://www.autozone.com/autozone/repairinfo/repairguide/repairGuideContent.jsp?pageId=0900c1528003c906 Here's some help.

should be on the emissions label on underside of hood. but anyways its .050in

Is the check engine light on ?You may have a problem with a solenoid or pressure problem in the transaxle.

The gauge may be off that much and it may really be running on empty.You could also have some junk floating around in the bottom of the tank.

dave not ur answer but might lead u in the right direction. had a friend with similar prob. a elec. plug under dash that runs air deverter flow flap needs unplugged then turn vehicle off then restart .should find it somewhere around the air flo box on passengerside floor he still has problems once in awhile but does this and works for awhile longer

This problem must be tested using a special tool at the Chrysler dealer, there are no home repairs that you can do with the tools and the repair books from the dealer or a well equipped shop.

Need the transaxle rebuiltAt 14 years, you may want to donate it